Search results

  1. S

    Fly tipping. . .

    There was a greenwatse site in bromley A private site operating on a farm but it got to big for the premesis so moved to another farm They were cheap and taking about 30 to 50 van loads a day they also accepeted small amounts at a fair rate a fiver for a builders bag i tthink Travelers even...
  2. S

    T7 new Holland front suspension

    Presume its the same as the older models had a t6080 that an o ring in the solenoid went meant it sank very quickly then another solenoid went and acted very weird
  3. S

    Triple mounted flail mowers

    Spearhead also do a range of tripples think up to 10 or 11 meters possibly
  4. S

    Fly tipping. . .

    I drive a grab lorry for someone on the flytip contract and what there dumping is getting bigger 28tonne of contaminated soil from a soil screener in the middle of a lane 40yard skips worth in the middle of an A road 1 oclock in the morning 2 days running same people dumped full transit worth...
  5. S

    Overalls

    I think each pair is hand cut still so you end up with each pair being slightly different i have some of there jeans that are tight some are loose despite being the same size
  6. S

    Overalls

    I don't know about there boiler suit type overalls but i have carhartt bib and brace type overalls and they are awesome twice as thick material as anything else and then 2 layers over the front of the leg they last forever and decent pockets that actually fit stuff in
  7. S

    Quality light chainsaw

    All rear handled saws are banned by hse for use on the ground not because of the temtation to use one handed but because even two handed there is significantly less leaverage to fight kickback Both saws you mentioned are available with rear handles and the rear handled versions are better built...
  8. S

    Second hand 4x4 rigid lorry

    Thats the pole lorrys i talked of its only 13 tonnes and just over 200hp with that crane fitted will only be good for about 3tonne load the Renault should be good for 8 The little bedford ex military ones again will be 3tonne payload
  9. S

    Second hand 4x4 rigid lorry

    I think 16 tonne mught be pushing it slightly on a 4 wheeler when you bear in mind the lorry will be around 8 to 10 tonnestonn i wouldnt think the axles would be no more than 10 tonne on that lorry possibly 8 so your only looking at maybe 10 tonnes on a 4 wheeler maybe 12 at a push but that...
  10. S

    Second hand 4x4 rigid lorry

    Here is another renault twice the price but a better description of the running gear All common components by the lools of it https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F283041690330
  11. S

    Second hand 4x4 rigid lorry

    I think some of the Renault axles can run as high as 15 tonnes on a drive axles and 12.5 on steering axles Some of the Renault volumetric mixers where running 55tonnes on an 8wheel chassis
  12. S

    Second hand 4x4 rigid lorry

    You will be limited to the desighn weight of the axles so the axles on a 13 tonner will be of lighter duty However if they are like the 2wd versions the 13 tonner will run slightly smaller wheels giving better better turning circle than the 18
  13. S

    Second hand 4x4 rigid lorry

    Loads of 13tonne merc pole lorries but will only have a carrying capacity of 3 or 4 tonnes and are just over 200hp But there is this https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F263729368806 Its 18tonne i think so should have around 10 tonne capacity...
  14. S

    Second hand 4x4 rigid lorry

    There are plenty of ex utility 4x4 merc and ivecos on eBay even come with a hiab also there are a couple of 6x6 tipper on there too with cranes and low mileage
  15. S

    Zero turn mowers

    Yes they do leave marks and get stuck very easily theres a lot of weight on thoose little wheels
  16. S

    Zero turn mowers

    They take a bit of getting used to too drive or atleast the kubotas do the levers dont sprong back like a digger makes a big difference The big kubotas have a proper deck not pressed steel The zero turns great in small areas or lots of awkward bits but are really quite rubbish on anything...
  17. S

    Hydraulic pto

    Someone would be able to calculate it for you but if you google tachometer several come up for as little as £10
  18. S

    Hydraulic pto

    If you dont need the snow blower remove that pump and have an engineer make up an adapter from the shaft to a pto spindle if you havent got the flail yet put a tacho on it find the speed and buy the flail according to the speed it turns as they are available as 540 or 1000 speed gearboxes
  19. S

    Sarcastic no horse riding signs

    I dont know what brands bit have used them at 200yards line of sight and nearly 100 blind so they are available This was on a cantilever one
  20. S

    Sarcastic no horse riding signs

    Have a clicker it will be open before you get there
Top