Search results

I will load a pic so you can see what im up to . So the loader is piped into the spools at rear just the quickest way at moment , as u can see have 10.00- 16 tyres on front but need to know what pressure to put in them when lifting weight . Now i have the manual for the loader and it says it has...

Went to take my ladys muck trailer up to farm today and twice it cut out on me . She has an old griffiths grain trailer and has been packing it solid with straw last 2 weeks , with that in mind and the constant rain would it be true to say that the trailer was to heavy to pull down the lane up...

Could any 1 give me advice on how to remove and replace the starter solonoid on a mf 590 please . I have the workshop manual but no info in there . I have removed the magnetic front part but the piston or ram that engages the starter motor is still inplace i have no idea how to remove it . Any...

Some 1 told me that i can use hydraulic oil in the transmission , would that b ok ? I now use 10 w 30 for both engine and transmission any advice be appreciated

A friend of mine broke a needle on his old baler ,after a cpl of hours looking in sheds we found one , same code number .perfict we thought .after we offered it up to the broken one was a different radius .can any body help . Many thanks

Can any one shed light on why 7 cleats on the outside of my rear tyre have worn down considerably , where all the rest are evenly worn ?

trying to rewire the lights on our muck trailer , but cant get to grips with wiring , have power to the socket on 590 , but trailer cable is only 5 core and there isnt a cable in centre of male socket , can any one help , cheers

just fitted loader bracket to clutch housing and the housing inspection plate was very oily and small debris , ie a few metal shards and fragments of maybe plastic were on the plate , can any one identify what the problem might be , a friend said ,obvious the clutch and seals from the engine are...

im looking for the underbeam brackets and stays off a mf 80 loader to fit our old mf590 ,if any one knows of any please let me know , thanks