Search results

That’s the one

We’ve used first circle (Nampak) for about 5 years now, not perfect by any means but we prefer them to Blowplast, they are made with a % of recycled plastic so occasionally get an imperfection in the plastic. Not sure if we have the same supplier?

I have tried them and didn't get an overwhelming response, we would be using it 4 times per week and would ideally need a flowmeter and pump.

Does anyone know of a trailer tanker to transport approximately 5000 litres of milk, either new, used or even someone that would make something for us?

Although a defect is possible, chances are its something in your process, we have bottles bought this year although not used any yet so can't comment on that.

Yes we are using steam, it heats the soak water so not 100° . All ours were breaking either in the washer, on the conveyor or on the filler, we didn't have any break outside the dairy really. 75° us fine as long as chemical % is correct. We have a Send and return washer (not 100% what make it...

We had similar, we found the water was too hot (85°+) its a lot better at 75° ish. Might not sound much but made a difference for us.

More to do with the fact it is worn and about 60 years old. Parts are also nearly impossible to come by. The setup is driving a bottle washer constantly for around 3-4 hours per day. The clutch is there so that if a bottle becomes jammed it doesn't end up broken.

Dont know exactly but would guess 5-7kw and yes 3 phase

We currently have an electric motor that drives a clutch, which in turn drives a highly reduced gearbox (pic 1) the cluch gives us quite a bit of trouble. Is it possible to remove the clutch and drive the gearbox direct but still retain the protection that the clutch provides?

Roundup is a herbicide not a pesticide...

Ive never understood wanting wellies to last ages. We often spend 8+ hours per day in them. Your feet are massively important and if it comes down to it i would happily buy a new pair every month and still consider it cheap..

Which part of the country are you in?

Is it in gear?

Which part of Lancashire?

20ft fridge/freezer container, insulated and lined with a cheqer plate floor. Air tight doors. Gets down to temperature really quickly. All reasonable offers considered

Yes if you don’t mind?

Thought as much, the price we have is for an albutt.

we are in the market for a new bucket for our manitou 629, the plate has disappeared off our old one and not sure where to measure to (curved) what is a reasonable size? Currently have a price for a 7ft 6, 1.5 cu m.