Hi , my Carrier has some packer sections that are very worn mainly in an area where the scrapers have not been set up well.
I’d like to replace the worn section to get some more life out of the rest.
If anyone has any part worn, let me know please.
I’m looking for an extra bowser ready for this harvest. Ideally 2-5000lt towable but other sizes considered or transportable tank that I can put on a trailer.
I will be needing to find a couple of new staff members soon and I’m considering how best to recruit them. In the past, I’ve managed to find people locally but this seems to be getting harder.
Have other members had much response from the Jobs Board in the classified?
I notice quite a few jobs...
I’m looking for a forklift or preferably teletruk for using around the yard. Diesel trucks seem to be in short supply compared to gas powered. Obviously I have diesel on site so gas will be a PITA but are there any other pitfalls or maybe advantages to gas?
I’m looking for an auger to take grain away from my mobile drier. Ideally minimum 10’ long but any length could be of interest, needs to be 3 phase and move 80t/hr running horizontal.
Thanks
Hi , I’m looking to put 650/60 r34 on the front of a jd 6250r
Has anybody got a set or just the rims? (20x34)
Alternatively some bolt in centres 10 stud 280mm centre hole 105mm stud hole to hole.
This is a fairly common size fitted to JD 6r series and Fendt 700 and 800
TIA
I'm looking to buy weather station in the next few weeks and wondered if anybody could point me in the right direction.
I've applied for, and been accepted for a grant under CPSG and to comply it must measure and record the following: pressure, temp, humidity, rainfall, wind speed and...
hi, can anyone recommend a cost effective waste recycling site preferably in Shropshire or surrounding counties.
It's just fertiliser bags and ag-chem containers. I'm happy to deliver it
This is the project for today, can anybody post pictures of where the flexipipe from the rotometer fits intothe drills airstream please.
TIA
@Simon Chiles
@Clive @H.Jackson @Fish @Big-Al
Im looking to buy a 40-50hp compact tractor. It’s main duties will be estate maintenance, topping and spraying with a 400lt 6m Hardi. A local dealer has a very low houred MF1740 with a quicke loader. Does anybody know if Massey make these themselves or if it’s another make rebadged and also...
Cereal Trailers: Stewart - 15ton
Category: Cereal Trailers Manufacturer: Stewart Price: £11000 Condition: Used
Description:
Stewart 15t tipping trailer with air /abs braking roller over sheet, sprung drawbar and hydraulic back door. Only used as a Grain trailer on arable...
Cultivators: Vaderstad - Topdown
Category: Cultivators Manufacturer: Vaderstad Price: £27500 Condition: Used
Description:
2010 Vaderstad top-down td500 5m in very good condition. Still on original discs and shins. Points are 50mm tungsten.
Bought new in 2011 and not really used for the...
Rollers: Heva - 820 tip roller
Category: Rollers Manufacturer: Heva Price: £9750 Condition: Used
Description:
Heva / Opico top rolls 8.2m wide with shatterboards and 24inch rings with breakers. Had a complete new set of rings in August 2016 .
Images:
See the full size images for this...
Drills: Horsch - C04
Category: Drills Manufacturer: Horsch Price: £7000 Condition: Used
Description:
Horsch CO4 drill, 2001, cleared tyres, radar, pre-em markers
Not been used for a couple of seasons since the purchase of a sprinter. We were running this drill with Dutch opener coulters...
Combine Harvester and Accessories: New Holland - CR 980 Sale or Hire
Category: Combine Harvester and Accessories Manufacturer: New Holland Price: £78000 Condition: Used
Description:
New Holland CR980 2006 with 30' NH vario header. 900/60 r32 tyres, chopper, chaff spreader, Agleader insight...
A contractor has harvested some maize on a farm that I contract farm. It seems that a large proportion of the cobs have been lost through the bottom of the feed rolls and fallen on the floor. It was pointed out to the contractor that there appeared to be high losses but he said he could do...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.