Search results

Yes it sure is , i'll go and have a try . As you say it's not easy to make the tractor 'silent'. What i usually do is filter the messages . I let it run for a while and and then add filters in the responses. I have been successfull in getting other stuff out of there.

Hi all These last few weeks i've been learning allot of the canbus of Fendt. I've managed to control all hydraulic valves trough the canbus. Now i wonder this : If my tractor has section control active, is it possible to get this information over canbus , so that i can create a controller that...

Buy the Fendias on Aliexpress and activate it yourself ;-)

It's the first time i've entered this topic, i'd seen it before and while it's good that people can get stuff of their chest, it is also obvious that farming nowadays isn't for the pussies. I myself had to deal with allot of bad luck, i lost a son to leucemia at the age of 4, got myself...

Fendt has those too, but those are not standard but optional. And its not a cheap option. My solution would be way cheaper haha.

I think the ML160 was only fitted in the 818 and 820 series. The 716 had a ML140

There are limits. LOL

I can command basically anything. Every button that is in the cab can be copied to another button i can place anywhere.

That's not so true, because Fendt does offer the luxe spool valves who have the pressure relieve valves. And as always, you need to think what you do all the time when you're standing there. You could say the same from lift control. Your standing there, you could easely crush yourself . But...

The number stands for the power the transmission approximatly can handly. The ML90 can withstand 90kw of power, and so on. The letters ML come from the initial designer of these kinds of transmissions, Hans Marchal Leistungs vertsweigung Fendt changed it type indication for the new vario's to...

Hi all. I own a 718 SCR , with the standard spool valves on the back of the tractor. I know that fendt sells tractors that have spool valves with a lever to be able to connect the hoses even under pressure. I thought it would be very handy to have 4 buttons on the back that i can use to set...

My dad is 81 and he will drive it daily , so nice to hear !

Nice to hear ! Bought the 630-115v this afternoon, should be getting it next week. Thanx. True ! Can't really judge for JCB , i've driven a Merlo and the cab suspension is awesome, JD engine, Yuck haha, Think the Deutz is a pretty solid choice.

Indeed, the V is a normal hydrostatic unit, so i think completely without the 90 degree gearbox.

Any experiences with a 630 115V ? The 635 turns out to be too wide for us.

Oh i know ! hahaha.

Hi all, our 526 Turbo died last week, it had done it's fair share of work so i'm really not complaining. We are in for a replacement and the dealer has a 635 130 PS+ on stock, but i'm bothered with the width , it's almost 2.4m wide (i'm metric, sorry) and mine was 2.15m. The difference is...

We had this too, replace both relays for forward and reverse, they could be the cause for the blown fuse.

Post is outdated but i'd like to reply. I did buy a 526 Turbo with 5000hrs and 15 years old for 15k€ (about 12k pnds) . It had been driving on the farm for 5000 hours in 4 years without any problem, until it blew out the head gasket, the alarm failed to go off and overheated and ruined the...

Hi all ! I own a 526 and since a few weeks i've encountered following problems: - flaslights do not work, not left, not right. - shortly after this problem all the warning indicator lamps and the audio alarm went down. none of them light up when i turn the ignition on. I've checked every fuse...