Search results

  1. C

    Frost protection for toilet cubicle

    Building some toilet blocks for industrial lets on the farm. No heat source as such in the building itself , what would be the best way to prevent frost damage to toilets/plumbing? Was thinking maybe insulate cubicle and install a small electric heater on a timer / thermostat. Anyone with...
  2. C

    Auto trigger on diesel nozzle

    Having trouble with above when filling tractors with fuel. Does anyone know if these things wear out or need maintenance? Used to be able to leave on fully open position, now it won’t hold on in min position Thanks
  3. C

    Wearing parts for Claydon drill

    Recently purchased secondhand Claydon SR drill now needs new breaker leg shares (old ones are tungsten tipped) and A shares. Where’s the best place to get replacements ? Assuming genuine bourgault only ? Thanks
  4. C

    Home mixed calf creep

    Usually buy this in, but with prices as they are was looking at what we have on farm. We have a small tonnage of oats, to which we could add some beans and wheat. Would these be ok fed to calves and does anyone know what sort of ratio for each item. Was going to get a mobile mill mixer to...
  5. C

    Simba Cultipress levelling board rams

    When in work one sides hydraulic rams are farther out than the other on our 4.6m . Anyone else had this issue and how do you even them up? Could there be air in the system ? Valve needs adjustment ? Thanks
  6. C

    Anyone on here operate a ditch-witch for drainage work ?

    Am told that it will go down to 80cm and makes a 6 inch trench.Also any ideas for gravel dispensing into the piped trench welcome !
  7. C

    Techneat Avacast GD 200/400

    For broadcasting cover crops on cultivator and avadex on drill. Gps rate control if poss. Thanks
  8. C

    Which fertiliser spinner ?

    Sure this has been discussed before but can't find the thread. After many years and models of Amazone spinners think it's time for a change of brand after being very disappointed with the reliability and spread pattern of our current ZAm profis hydro. Any recommendations? Thanks
  9. C

    Spring crops following AstroKerb treated failed rape

    AstroKerb applied in mid November. Was considering spring barley Fss as a lower risk option. Would Linseed fall foul of the "Astro" element of the chemical, I think this is more persistent than the propzyamide part that is more soluble.Would like to avoid ploughing if possible as on heavy...
  10. C

    Roof Materials for Industrial Lets/storage

    Looking for some alternative uses for some of our redundant buildings. One of the local agents has told us that asbestos rooves are a big no -no if we change use to let the sheds. Has anyone had issues with this ? How do you tell if your roof is asbestos and not fibre cement ? Thanks in advance
  11. C

    Cattle feeding trailer

    Ideally 30 plus spaces and located Midlands area
  12. C

    Techneat nutri-start tank

    Looking for techneat front fertilizer tank, preferably 1000litre, with pump, manifold, rate controller etc. Would consider standard sprayer front tank but must have centrifugal hydraulic pump. Thanks PB
  13. C

    Milling Wheat proteins

    Has anyone used N -Durance 28 or similar products to increase protein in milling wheat ? It's a foliar applied dilutable liquid containing various forms of nitrogen , some slow release, used at the T2 fungicide timing. Thought it would be a better alternative to Nufol which tends to scorch, but...
Top