Just wondering if anyone knows how tall a male (or female) in case they are taller is, just need to know how high the ceiling needs to be on the ark ⛴️🦒🙈💦💦💦💦💦💦💦💦💦💦💦💦💦💦💦💦💦💦💦💦
What pressures are people running Michelin Xbibs at for general road work, fronts are 600/65R28 and rear 710/70R38 on a case puma 200cvx, doesn’t seem to matter if I pump them firm, run them softer, have a little bit of weight on, or not, or what setting suspension is on it bounces a lot 🤷🏻♂️
Does anyone know if you can slow 1 of these Adblue pumps down, it works great but the flow is far to fast and it bubbles out of the filler cap even if you try and feather the trigger on nozzle
If any of you get adblue in bulk does the tank have a special fitting that the delivery hose attached to or is it like a fuel delivery hose with open end and tap?, have a new unused 1400L fuel station at our disposal, also have 240v adblue pump kit available, was gonna swap the pump over onto...
anyone any more news on the rumor i heard last week that scott beef were closed after losing 2 contracts to supply Aldi and M&S, huge hole in the market if true
Anyone needing to change the fuel filters in a jcb 538-60 and doesn’t have the £40odd filter spanner from jcb for the filter underneath a goldenrod filter spanner has the same groves in it and fits, just gotta hold it on with 2nd hand to stop it slipping off
What are people using for welding gloves? For mig and arc welding also oxy bottle work, the usual welding gauntlets from ag suppliers don’t seem to last very long, either go hard with the heat or the stitching goes on them or normally both, but mainly on left hand, so if any left handed welders...
It’s taken a while in between other jobs but finally got the last of the water troughs in sheep shed replumbed this afternoon, 2 lines with 2x 1’ square troughs back to back on stansions and 2x 4’ troughs in pens all fed off a levelling chamber outside shed, 40yr old and springing leaks all...
Not seen any veganuary adverts on tv yet but have seen and advert a few times that is pushing red meat and dairy products, hopefully a sign of things to come
Probably looking to replace mower for next season, lely 320mc atm, what to look for? And what to avoid, mounted 3m(ish). conditioner or not? Cutting sensible crops of grass for bales silage and some hay but also cutting thick rough margin grass
what is it with large companies?? 2 things this past few days, first wanted the EKA code off landrover for a problem we're having on defender, called them on friday only to be told they don't work on fridays :X3:, then wanted a grain sock for our stewart grain trailer, dealer called them up to...
Shep on holiday LR been away for service and MOT, came back over the weekend, Monday morning boss went to go around the stock couldn’t get alarm to go off on LR by the time I got a look at it battery was flat so jump started it off booster box (started no problem) got it back to workshop and put...
Does anyone still make a front linkage mounted disc unit of some kind that could be used as a primary cultivation in front of a pronto drill, also does anyone use something similar or a toolbar for going direct into stubble with a pronto
Anyone made their own? I have a 20t bottle jack or some old trailer rams off a 12t trailer, it wouldn’t get used every day but handy to have for the odd job
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.