After a cheetah for truck and tractor tyres, they range from £100 to £400 for effectively the same thing.
Are the cheap ones going to be condemned straight away by any safety people, or dent as soon as you put them on the floor?
Is there such a thing for a workshop airline?
So when altering tyre pressures we can set it to say 12 and let it get on with it, a bit like some tractors do from the seat?
In the market for something like this:
https://www.broxap.com/kerbside-protector.html
But that’s cast iron, £600 and 20 week lead time.
Anyone know if you can but concrete versions? I don’t particularly want the ‘Bell Bollards’ though
Have a cable where the outer sheath has been damaged and stripped. What’s the best way to repair? Got large plugs on the end so standard heat shrink isn’t an option.
axion
cattle
claas
cnh
cultivator
deere
diesel
fastrac
fendt
finance
financial
jcb
kubota
land rover
management
market
mower
new holland
parts
performance
puma
repairs
toyota
training
yamaha
One of the hose tails has snapped off the manifold on a Grammer seat. Any suggestions how to bodge it?
Thinking a roll pin to hold it and some glue to seal it but not sure it’d hold the air pressure
Got a verge mower with a ball end that gets quite a lot of pollen / sap around it. Unless given grease every 5-6 hrs when working, it stops taking grease, you have to dig the old grease put with a pick then it’ll take it again. The grease goes hard and grainy.
Using Morris K42EP multi purpose...
Looking at smart locks to fit to a house / farm office.
Has anyone got a setup, how do you get on with it?
Also can you get wired power ones? Most seem to need new batteries every 3-6 months.
My Evolution mag drill died yesterday. It was good but would like a variable speed one next time. Any recommendations?
Anyone tried the Milwaukwee cordless?
https://www.facebook.com/watch/live/?ref=watch_permalink&v=751450669175143
Fair play it looks like they've listened to most of the feedback.They've put an air gauge back on the dash!
A wifi reversing camera on the back of an artic trailer, connecting to an ipad in the cab. The signal is a bit weak. I’ve tried a wired extension aerial, but no better. Can you get 24v ip rated range extenders? Or powered extension aerials?
Want to fit work lights to a trailer, by taking a feed from the sidelights (all led so no issue there).
But need to be able to turn them off from the cab, can you get quality, ip rated, reliable remote switches that work with a keyfob?
Need to get a wifi signal into the next building. Can't lay a cable and power is on a separate circuit so needs to be wifi.
I think I need a wireless bridge and another wifi router.
Can you buy ready made 'plug and play' kits or have I got to buy a bridge and a router and set it all up myself...
Bit of a weird one this. Washed one of our JDs last week. It’s been washed several times before and we’ve used the same TFR for years. But after 5 minutes the hubs on the front axle went like this? Didn’t affect the yellow on the wheels or any green. Washed off fine. Wondering if there’s a dye...
I have a 5th wheel dolly used for shunting road going trailers round the yard while we load them etc. It’s getting tedious winding the legs up and down as it’s 5” lower than the 5th wheel on our tractor units. I’d also like to make it height adjustable to same the slam plates. Has anyone done...
HGV Class 1 Driver Required, hours flexible to suit the right candidate.
Working for a small, flexible family firm based near Huntingdon (10 miles) and Peterborough (12 miles).
Curtainsider and flatbed work with hay, straw and fertiliser will be involved. Nights out would be useful but not...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.