Has anyone yet seen there 3g rtk signal dissappear yet?
Had an email from Chandler's warning us about the 3g signal going and advising we upgrade the 3g modem to a 4g one to save any potential problems when the switch over comes.
From reading the email alot of earlier tractors in in 2013 to...
Got a kverneland optima hd maize drill. Running on isobus through the fendt screen. Its also section controlled unlocked.
Have been using this drill without issues for 3 years and works perfectly.
The other day drilling it threw a bit of a hissy fit which set off loads of warning alarms totally...
Have a 4m lemken solitair 9 with the old style LH agro 5000 control box, just can't seem to get the rate right when planting wheat, its over applying by a fair bit.
Can calibrate it several times and the load figure will always be similar.
The land wheel speed isnt far off the radar speed on...
Has anyone managed to get an amazone hydro profis with the amatron + screen to work with gps doing auto shutoff?
Spreader is non isobus , has weigh cells with the 3 section shutoff on each side. We havnt got the extra amazone gps switch box, and was wondering is it possible to link it to the...
Im planning on putting up a steel framed building, its going to be quite close to the house. Has anyone used a slate effect roof sheet over normal tin sheets or any other alternative. The plan is to clad the buildings gable ends in waney edge type wood, trying to make it look a bit less...
Whats the best type of Wi-Fi extender to get wifi from the house to the buildngs to run 4 cctv cameras in the shed? The house and building is approx 120 metres apart with another building in between but no trees.
Wifi router in the house is getting 55mbps download and 20mbps uploads, there are...
Im experiencing high rotor losses these last few days, alot more than i have all season. In simular crops with similar straw and for some reason im getting double the losses. Have tried every setting and combination possible, have tried moving the rotor vanes but no help. I was getting 55-60t/hr...
Have 16 plain discs off a moore unidrill.
Replaced a whole set as there was 1 missing
16 discs 335mm diameter just over 13" so a bit of life left in them
1 disc has a flat spot as shown in the pictures . 17 discs in total
Might do a turn for someone
Open to offers
Based in herefordshire
Just purchased an old moore unidrill to direct drill some grass around the farm. Anyone have any settings for grass and possibly small seeds such as turnips and forage rape?
Also any tips on setting them up?
Currently replacing every bearing in the discs. The drilling coulters look worn...
Has anyone dealt with the above company?
Looking at a steel framed building they have for sale, they are bit away from me so any info on them would be much appreciated.
Have inserted a new 32gb card from the dash cam into the laptop. When clicking on it i get the DCIM folder, when i open that all i get is a load of UUUUUUUU.uuu files which i cannot open or play. Same thing happens when i try and use the camera through the smart tv to view.
Am not very computer...
Is it possible or has anyone put a star fire auto trac system on a new holland?
Have 2 auto steer ready new hollands as well as john deere and was looking to put dome and screen into a new holland and use auto steer. Currently have 2 star fire systems running on sf2 and it would nice to be able...
2 pedigree oxford sandy and blacks sows for sale with paper work.
Cynthia bloodline
Both 5 year old dob 05/03/2013
Both had 4 successful litters usually between 10-13 each time
Have lived outside and electric fence trained.
Just sold the last litters so ready to go back to the boar.
Lovely quiet...
For sale.
Oxford sandy and black piglets for sale. 8 weeks old ready to go. Electric fence trained very sociable piglets lovely markings . 8 piglets in total left.
£50 per piglet.
Based in Herefordshire
07970102659
We're needing a new front mudguard skin for a 6210r along with all the brackets pivots and mounting pin as 1 has snapped off at the pin on the pivot and went under the tractor and not a happy ending. The other side is also a bit loose and wobbly. Are these available from anywhere apart from the...
Anyone got one or used one?
Looking at getting one for use on potato planter for mainly mapping out the boundary and giving an internal boundary line to see when to lift out/drop in.
Any comments appreciated , thanks
Does anyone know of a firm that sell rubber blocks / shock absorbers like the pictures?
they are off the drilling coulters on a pottinger drill that fit around some box section with a clamp over the top, new ones are silly money and we need alot.
cheers
Ive been asked to find out what the legal width of a machine an 18 year old with a tractor and car license can take on the public highway. The machine in question will be a grimme potato harvester.
thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.