Has anyone seen or heard form Andrew Huston lately? I’ve ordered a pig feeder from him back in September with a delivery date around December, that was pushed back to February with no transport available as an excuse. Spoke face to face with him at the pig and poultry fair in May and he promised...
With a change of “system” coming what’s the best way to mix sows? They are currently kept in 4 groups of 10-12 but we are soon going to be keeping them as one big group. Inevitably there will be some fighting to start with, would stresnill work or has anyone here used...
A neighbour has asked me where’s the best place to get them from. Not sure of the model number but it has Clark Hurth axles. Looks like https://images.app.goo.gl/cVsJutEGfAhA9w8n9 or a bit bigger. Any recommendations?
The fastrac looks to have fallen out with me this week with a few problems all coming at once. We’ll start with the suspension, started here up yesterday and only the left side is correcting the hight of the rear suspension. The right side won’t move unless you get under and pull/push the...
Any recommendations or advice on the best/ trouble free sow feeders? We have 50 sows to feed, currently split into four groups. We have Erra feeders atm and find in a group of 10 we get 2 fat sows,6 average and 2 thin sows. I’d like to open the shed up and feed them all through a feeder...
Don’t know a lot about petrol ones but we could do with one as electric is poor about our place. Not to expensive but not interested in a Chinese one either. Has anyone any recommendations. Are jet Mac any good?
Thanks
Tommy
For the past two days I get a message to either my phone or the iPad telling me someone in Newark is trying to access my iCloud account. I press the “don’t allow” and that seems to be the end of it. Has anyone else had this? Should I do more? I have changed the password
Got something playing about with an ‘04 dynashift. After a few hrs of work it will start to drop revs off, not many say 50-100 and in the blink of an eye they are back. It’s as if you’re giving the throttle pedal a slight blip but she’s loosing revs rather than increasing. While it’s doing this...
My 2125 has started to not engage medium or high range, it seems fine with low or reverse. Has been coming on slowly but now getting worse. It put up an error D021 twice but only after a lot of flicking from N to M (I think I might have caused that myself).
I know a few of you have put a lot of...
This is on eBay if anyone’s looking to direct drill grass. I know it’s a good one as I’ve used it myself
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F283401577042
Here’s a video of it working, we’ve drilled clover, grass and vetches in the times we borrowed it
Has anyone on here got a fac for an air rifle? Could do with a bit more range than the 12ft/lb can manage. Not convinced I need to go for a rimfire as its always handy to pop crows/pigeons around the yard. If in the future I could then go for a 17hmr for the longer bunnies if I felt the need and...
Next doors tractor won't engage 4wd. Am I right in thinking that it needs 12v to fetch it out as I can't get it to show any at the solenoid but I would have thought it should be stuck in if that was the problem??? What can I be missing before I go any further?
Cheers
Tommy
It turns out that the portamig welder can't be fixed so I'm on the lookout for a new one. Needs to be about 300 amp single phase on a 32amp plug and also have to put up with life on a farm.
Any suggestions welcome, I'll be at Lamma on Wednesday I hope so will have a good look at some there...
We are looking for osr straw. Within a 100/150 mile radius of Chester. Can collect with artic.
Drop me a pm if you have some or know of any
Thanks
Tommy
I'm looking for a pair of rear disks,hub and arm for a Dowdeswell DP120. I have the bracket that bolts to the beam and need the rest to finish it off.
Thanks
Tommy
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.