3050

Hi there, We have recently acquired a JD 3050 with high lift, all is great however the link arm movement is super sensitive. If you move the raise/lower lever by about 10mm the arms will move far more than they should. We have tried moving the draft control but that seems to just change which...

I bought a John Deere 3050 a few months ago and it came with the remains of a front linkage, no arms and rams to be found. As seen from the attached pictures, the front linkage was bolted to the side rails, as far back as the two battery boxes. Does anyone know what brand it may be or who...

Hi all, I'm after buying a 3050 John deere. It has the original width rubber still on it - 13.6 R28 on front (340/85 R28) and 18.4 R38 (460/85 R38) on the rear. I would like to put wider rubber on both the front and the back. I was thinking of 600/65/38s on the rear. Looking at the attached...

Hi, I have a Deere 3050 with a poorly PTO, I think it needs a new PTO clutch, so the tractor needs splitting. Not wanting to pay Tuckwells prices I am looking for someone to help me split the tractor and repair? Does anyone know anyone who might be able to help? Cheers

So I am looking for a tachometer or rev gauge for a John Deere 3650. Just wondering is anyone on here breaking one at the moment. Other models will suit.. thanks

Which would you buy as a project and why? The tractor will be used for match ploughing one way 3f and possible reversible 4f,transporting other toys and a hand full of days of work!

were going to go look at a 3050 is there anything special to watch out for? good places to look for parts? are solid ish cabs bad to find?

Hi, I want to put twin beacons on my 3050. I was just wondering if someone could tell me the best way that I could set them up.