baler

  1. J

    Vicon Rv 1601

    I'm gonna go & look at a Vicon Rv 1601 baler (2001), anything specific I should look out for on them? Looks in really good condition. They sound like decent balers from what I've read. (I'm upgrading from a JD 550)
  2. LandPowerTV

    KUHN SB 1290 iD Large Square Baler: CUSTOMER REVIEW

    Featuring a clever double plunger system (Twin Pact), we find out how Kuhn's SB 1290 iD large square baler has been performing for one North Yorkshire farm. FOR THE FULL VIDEO, VISIT LandPowerTV.com Baler specifications: Make: Kuhn Model: SB 1290 iD Bale height: 90cm Bale width: 120cm Bale...
  3. J

    Case RBX 452 baler

    Hi I need a baler to bale silage, haylege and hay. Would a case 452 baler suit me or does anybody know of any issues with them. thank you in advance for any information.👍
  4. F

    John Deere 342 Knotter Issue

    Hello all, We have recently been trying to get a JD 342 working that has been laying in a shed for 20+ years. Most things seem to be going well, however she can be quite temperamental when it comes to tying knots. It will tie them most of the time but every now and then it will get a knot...
  5. N

    LELY 202 special

    I recently bought a LELY 202special Have had a couple of times that the grass goes on top of the rotor and chokes in the veins, any suggestions Cheers
  6. S

    Hesston 4600 baler

    Has anyone had any experience with the Heston 4600 Baler’s. Are they good or bad. I’m only looking for something to do around 500 bales a year tops. I’ve had a look at a 4900 hesston but that’s too big for me and I prefer square bales to round ones. Anything to look out for? Cheers
  7. ciarano21

    Fusion 1

    Anyone have a manual for a fusion one or can help. Couple of issues, won’t pull in the net automatically wen bale full, and when it nets and lets out onto wrapper it’s doesn’t wrap in auto. Have to hold button and manually wrap bale. Any help or tips will b appreciated!
  8. R

    Jones Baler

    Girl admitting defeat... Bought all the kit I needed to make my own conventional bales 2019. All went well then hired out my Jones 155 baler and it all went wrong. Help needed, the bill hook is broken. Can't seem to find advice or spare. Not sure if it's easier to replace the whole knotters...
  9. Ollie7530

    Alternative methods of joining bale twine together (Baler Twine Spools)

    I have been having issues with the reef knot catching on the knotter causing stoppages and downtime. I am just wondering what issues operators have had and any alternative methods of joining the spools of twine together, rather than using a traditional reef knot. Any help would be appreciated...
  10. B

    Diversifying into high quality hay production

    Does anyone have any experience producing high quality small bale hay/haylage for the equine market? I am looking to diversify my business and I was wondering if anyone had any good sources of information regarding, what varieties of grass to grow, what equipment they use and optimising crop...
  11. Shane s

    New Holland 376 Banana Bales

    Well, i have a new holland 376 baler here and 90% of the time she makes banana bales, i have been told it is because she is not bringing enough hay accross to the far side of the chamber. Has anybody else got experience with this and know how to fix it?
  12. B

    Baler controller to New Holland or Case (BR -series )

    Hi . Im looking out for baler controller (New Holland or Case ) "with knives "- used one . Type of controller is BR .. If anyone could help me ....
  13. Massey 5440

    Flat 8 sledge brackets

    Has anyone got a set of brackets for a browns flat 8 accumulator bought one but has no brackets to fix up to baler I’ve got a NH 370 Also on the search for a browns grab
  14. N

    Ken Mills baling system

    A while back we purchased a 2004 Ken Mills 9369 hay baling system for a customer of ours at a auction in Kansas, USA. Low and behold our customer did not want it after all, so we are stuck with this expensive baler that we do not really have a market for here in Mexico. Especially since we are a...
  15. M

    John Deere 575 baler control & power cables

    Hi, We finally started got baling straw last night when the chain on the PTO guard broke and caught our cables between the baler and the tractor, pulling them right into the PTO breaking all the cables. Does anyone have a wiring diagram for this baler, or better still an old 575 sitting they'd...
  16. A

    John deere 550 baler part name

    Hello! This little thingy was used to prevent the string to get to the edge of the bale when tying, but I need to replace it, and I don't know its name, nor where I can get a new one. Can you provide me with the name of this part and also with a website where I can aquire it? Thanks! PS: sorry...
  17. Massey 5440

    Flat 8 grab and sledge

    Hi guys after a flat 8 grab and sledge prefer browns but anything considered I'm in Devon but will travel Cheers
  18. Massey 5440

    Welger RP12 Bearings

    Hi Guys I know theres varios threads about rp12 bearings but none have really seemed to help im having problems getting the roller apart to change the bearing on the last roller on the tailgate has anyone got any pointers Thanks
  19. GAM

    Wanted Cooks Bale Sledge

    Wanted Cooks Flat 8 Bale Sledge.
  20. 6

    Hp requirements for Mchale f550 baler

    Does anyone know what is the minimum pto hp required to work a mchale f550 baler comfortably?
Top