I'm looking for ideas on what to put at front of bays to hold barley.
Would about 20ft wide ten ft high.
At present put hesstons across and anything else can find to plug holes, then a couple of heavy duty straps across to hold barley. Then load over the top with telescopic.
This isn't very...
'Twas always thus - that 10-14 days in the run up to the start of lambing heralds the onslaught of TLD, prolapses, blown guts, abortions and the 1001 other things that can go wrong with sheep :banghead:
Many moons ago, when I was young and keen, an old bloke once told me, "A farm or a piece...
Anyone on here know what speed the shaft on a bamford roller mill similar to the one in the pic Should run at? And what sort of hp it would need? Cheers !
After being without power for a couple of weeks due to the recent storm we've decided to invest in a generator to plug direct into the supply, ready for future emergencies.
What's anyone's experience with diesel ones big enough to run ideally the farmhouse and a bungalow on basic essentials...
The on-trend topic of the moment. Little lister genny has been keeping the borehole running (small kettle at a push) but it's getting tedious doing everything else by torchlight. Can't afford any more chippy teas.
I acquired this at a sale for scrap money with a view to a stationary electric...
Just after people's opinions. What would you top this with?
Rotary topper
Flail topper
Disc mower
I've done it before with a rotary topper but I think it leaves a rough finish so the grass doesn't recover as well . Also used a lot of shear bolts.
Cut it all with disc mower first year we had it...
AT KEMPS FARM, WINSFORD, MINEHEAD, TA24 7HT
NOW LIVE! CLOSING SUNDAY 11TH JULY (FROM 7PM)
DISPERSAL SALE OF 2 JOHN DEERE TRACTORS, MANITOU HANDLER, YANMAR DIGGER, LAND ROVER DEFENDER 90, BOBCAT 753, HONDA QUAD BIKE, TERRATRAC ALPINE TRACTOR, FARM MACHINERY, LIVESTOCK & GENERAL EQUIPMENT BY...
I suspect the answer is "what weight is it? Scrap value" but is there any other value in a vintage bruiser? Still in situ, but think it will be at least 40 years since it was used. Haven't got a make or photos but can get some if it "might" be worth anything.
Anyone on here using a bruiser ? Currently running a korte 1000 for dry rolling and bit crimping . Although I have seen these bruisers around, was wondering if there better ?
Tia
I'm a livestock farmer and I have no grain store but I do have a shed that is waterproof with good walls and concrete floor.
Is it possible to just use some of those pedestal electric fans to store/dry grain?
What percentage moisture could you get away with at harvest going on like this?
And...
Been offered the use of one. The old Carrier drill not the Vaderstadt model.
Do they cover the seed? How many hp for 4m?
will it go any better than an MF30 disc drill in damp conditions on ploughed ground? Will it bring up too much ploughed down turf? What sort of cultivation would be best in...
Got an old ford 4600 that needs clutch done again. The gearbox has 10 splines and a 11 inch friction plate. Looking online I see there are 12" and 13" even a paddle 13" plate available along with corresponding covers.
Would anybody know if these are compatible with existing flywheel or do...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.