chafer

Just been watching the women’s race .. Very flat, pretty boring and wet looking albeit likely fertile And respect to the man watching off the roof of his combine.

Just wondering if anyone is successful in broadcasting cover crops into standing crop pre harvest. We are at 36m, is anyone doing it at that width, and also has it proved a successful method of establishment? Cheers

Hi all, Can anyone point me in the direction of an operator’s manual for my recently acquired Chafer T2000 trailed sprayer? It’s from 1993 but has been really well looked after. I’d like to try to keep it in the same nick. I’m also trying to figure out the most appropriate size of row crop...

To pull a 4000 litre trailed sprayer (32m boom) as its main job (liquid fert as well) mostly flat land no root crops. It’ll also cart corn with 15t trailers, roll with 12m rolls and run a 4m combi drill on rare occasions. Edit - it’ll need a big oil pump as the sprayer runs off the free flow...

Who are these plastic pipe clamps made by please? What is the advantage/disadvantage over a jubilee clip? It’s on the return pipe on Chafer sprayer.

What's the thoughts on Case/NH 145 4cyl vs 150hp 6 cylinder. Case 145 vs Case 150 NH T6.175 vs NH T6.180 Mixed work load. Thanks.

We’ve been using a trailed 36m sprayer running on 650’s all year round (tractor also on 650’s). We are thinking of selling the sprayer as it’s now 10 years old. Looking around newish trailed machines have shot up in price making decent used SP’s look attractive again but they all seem to be 24m...

Advantages/disadvantages please. Mostly specced for liquid fert machines? Weigh much more? Any thoughts gratefully received.

as the above, I am choosing among the above mentioned. Horsh sure has very stable booms, But it is 10 percent ahead of almost full spec Amazone ux. Haven't received Ixtrac price yet, but hoping it will cost the least. I also have kv spreader with isobus control unit and section control...

I have been searching for a commercially available unit to permanently install on my sprayer and permanently wire to the battery. It needs to plug into the mains when parked up, switch it on and it keeps the battery trickle charged. Then when I come to start the sprayer it needs a simple boost...

Hello. I bought a Chafer 418 from 2003. I need a technical book or a user manual. Can you help me? Thank you.

Chafer Sentry Advert added by: David Aglen @David_A Machinery Details Category: Sprayers Trailed sprayers Price: £25000 Condition: Good Description New in 2013, RDS Rate controller, twin lines with triple bodies on first line and single on the second...

Looking for 4 tyres and 10 stud rims to fit a chafer sp sprayer. pm please .

Presently using chafer dribble bars but a potential change to a different sprayer means that nozzles would be the way to go. What are you using and how do you get on with them?

Anyone running one of these? Good/bad points

Chafer QuickStart , liquid fertiliser applicator, rds control, hyd pump, two tanks , 2000 litres. Advert added by: Damian Pell @spikeislander Machinery Details Category: Applicators Fertiliser spreader / broadcaster Price: £1950 Condition: Good Description...

Can anyone recommend/ tell me the best fitting air seat to put in a 32.6? Sick to death of the sprung seat in there now. No movement as it’s all been broken over the years and hellishly uncomfortable nowerdays also. Doesn't have to be crazy money just a good comfortable seat please 👍🏻

I have Chafer RG418 , 2009, 4800 hours, 3000 litre, 300 litre clean water, auto section control, mapping , 2 sets of wheels, 3 speed , current mot and very tidy. I am wanting to swap it for ....... I would like to find a trailed 24 metre (or 24/36) , 4000 + litre machine with gps etc or a...

Chafer Sentry 2 Trailed Sprayer Advert added by: Chafer Machinery Ltd Machinery Details Category: Sprayers Trailed sprayers Price: £ Condition: Used Description Currently 30m F Series boom, can be converted to 24 or 28m. Independent boom tilt 1"...

Hey all, I hope you don't mind indulging this non-farmer but I'm very curious about the typical size and power of tractors - plus the size of implements - you use vs. the size of fields/farm that you're working on? I've been reading through a lot of machinery threads and trying to collate the...