cnh

:scratchhead: https://www.ebay.co.uk/itm/165447942921?hash=item2685774309:g:91IAAOSw~PliZWIZ

Hello all ! I am in the market for a haulage tractor to do all my trailer work. Its main job will be hauling a dump trailer both on and off road. I am considering .. John deere 6215r T7.260 Puma 220 Fastrac Valtra t214 or 234 Fendt 930 Tractor has to have over 220 horses and front brakes. Any...

Hello I Have a Deutz Fahr TTV 430 brought it new 2012 and it done 1900 hours been serviced regularly and it now doesn't like to go forwards up a slope if I am driving forwards in either High or low range and start to go up or down a hill or slope tractor sort of sounds like clutch is slipping...

Just been talking to local farmer he said local contractor recently had Fendt transmission rebuilt at a cost of £25,000 He also said full artic load of chicken feed is £10,000 I believe chicken feed cost as someone was talking on radio a few days ago not so sure about fendt transmission

Hi guys. looking to upgrade from a 2004 TM130 to a 2018 T6.145 AutoCommand. has anyone any experience with a T6.145 AC? My main job for the tractor will be ploughing with a four furrow plough. something the tm130 has little problem with, should the 145 pull away no problem or will it have its...

Am i mad looking at buying a fendt 936 with just over 10k hours on the clock as opposed to say a newholland t8 with same hours?

Hi, I ordered a new JD 6 weeks ago with an estimated delivery of November/December. I've still not had a build date that I was told would be released soon as the order was put in. I have chased this and dealer not go it yet. Anyone else having troubles with extended build/delivery dates? I'm...

Written by Justin Roberts from Agriland Driving down to the local dealer to lean over the counter, peering at a screen to identify machine parts has long been a ritual of machinery repair. CNH though, might soon be changing all that. The company has launched a new online parts e-commerce...

Were looking to get our 2014 T7270 setup for autosteer, it's not currently steer ready but we've got a nav controller and antenna ready. The last T7 I made autosteer (2012 T7.250) I fitted a New Holland DIA kit, it worked well in the field but was horrible to drive on the road. I've driven the...

Best tractor engine ever made ? give me your opinions !

I have a NH T5060 with 2 spools on the back, one is pumping oil ok and the other is not. Any ideas what could be the problem and how to fix it please?

Written by Justin Roberts from Agriland The story of Steyr goes all the way back to 1865 with the establishment of a gun factory near Steyr in Austria, a town famed for metallurgy and gunsmiths, which had grown prosperous suppling arms to the Hapsburg empire. By the outbreak of World War I, it...

Has anyone else noticed a plastic burning/melting smell from the plastic covers just below the exhaust, I’m guessing all the ad blue re gen is under there. the plastic on the outside is getting very very hot🤦‍♂️🔥🔥

I have recently heard of two tractors catching fire, and the cause is thought to be to doing with some thing happening when the particulates are being burnt off.The makes of tractor were a Case and a New Holland ( yes I know they are basically the same tractors). Has the above been known to...

I see many are deleting the Ad blue tech on their tractors - and more so now for obvious reasons. Therefore, I ask, anyone care to recommend a company in the Surrey/Sussex Hants areas that has done a delete for them?

Fendt vs Deere in efficiency?

Does anyone know the make of this radio? Supplied in our NH T6, I find it the simplest and most reliable and would like a couple more for other tractors!

Hi Guys, A new Tier 5 New Holland T6.160 and T6.180. Are there any component or physical build differences between the two models. Both are 6 cyl with different hp ratings. Is that literally the only difference? Specifying both with a 50km Electroshift transmission, is the only difference the...

KUHN CONTINUES TO INVEST IN TECHNICAL PERSONNEL Investment in technical personnel continues at KUHN Farm Machinery, with the latest recruits to the company’s regionally deployed product support team including Sam Murphy and Tom Hume. Sam Murphy will cover the South and South West of...

Written by Matt Hopkins from Precision Ag After buying Raven last year for $2.1 billion to bolster its position in precision agriculture and autonomy, CNH will now focus on "disciplined" M&A activity. The post CNH Sees Revenues Rising to 2024 As New Plan Focuses on Precision Agriculture...