We have 2 8s and both have the same issue. When changing down the dynershift the engine automatically revs up for a smooth change, sometimes it gets it spot on, sometimes it puts a few too many revs on and speeds up a little and now and again it give its self a great boot full and sets off at...
accident
cnh
cvt
cvx
death
deere
fendt
gate
health
health and safety
hse
injury
land rover
liability
market
massey
new holland
powershift
pto
software
t6
t7
valtra
wheat
Hi,
Was wondering if anyone is working a T7 auto command and could put up a pic of their oil sight glass to see how the oil is looking after some running. Our is nice and clear when cold but as soon as you start running gets entrained with air and bubbles and give me the fear we have a air...
Just taken delivery of a new JD6155m, don’t get me wrong it’s a nice tractor but when compared to the previous 6630 it’s a bit dull to drive. I know they are not allowed to smoke when worked hard (which is quite right) but the engine has no bark to it at all in fact you can hardly hear what...
Hi All
New to the forum but looking at purchasing a 2010 Case CVX with 5500hours. I’ve heard a few stories about them having transmission issues and wondering if it’s validated?
Was there any upgrades from the original ones that came out?
Any other thoughts or comments on them would be greatly...
Hello everyone,
I'm looking to buy a new tractor for my operations. I'm thinking of John Deere 6120m or Case Maxxum 150. The tractor is going to be ploughing, disking, cultivating, spraying, fertilizing, planting etc. The two tractors are similarly priced but the thing is I'm not sure of the...
How are people getting on with 4 cylinder engines above 150 Hp? Anyone with long term use of them had any engine issues, or have you been happy with the way the engines pull?
Have a Kubota here on demo at the moment which is 170Hp and it seems to pull well. It does have a CVT transmission which...
I have a case puma 160 cvx which makes a noise similar to moving a spool switch with no hose conected to it. It makes this noise as soon as it starts moving foward or back. Ive tried cancelling all spools and hydraulics but doesnt stop it. The only way it stoped for a short time is when i move...
Looking for people's views on best tractor for a mounted sprayer?
Have a 1900l front tank, 2000l rear with booms that fold up at back. Spraying circa 2000ha a year total. All cereals and liquid fert too.
Currently got a 2011 2170 fastrac 6500 hours, it's a bit noisy and uncomfortable, so...
hi all.
Need to fit a free flow return to the case puma 160 to run a fusion 2 baler.
Just wondered if its a simple job and what is required. Don't really want to get case engineers out if it a simple job that i can do.
local dealer want £400 to do it but i assume its just a coupling fitted...
The MF 5455 is struggling on the round baler and needs replacing really. Our local dealer has become a McCormick dealer and want to stick with them as the service is excellent.
Anyone had any experience of McCormick or Landini tractors. Gonna be looking for around 130hp and about 5 to 10 years...
Seems to be restricting itself,
Forward speed maxed out on the scroll wheel, engine droop maxed out, pedal to the metal, but only doing 40k
Done a gearbox recalibration, which made no difference
Anybody had this before ?
I’ve a t7 230 and im
Wondering is it possible to set it up so we can lift the front mower and back mower with the joystick or with two of the electric spools. At the moment we lift front mower with joystick and rear mower with spool switch
Has anyone else purchased an 8280 and had problems? We have four under a year old and had so many problems I couldn’t list them all on here. 2 having gearboxes 1 about to let go. Exhausts falling off, brakes failing, doors smashing, just to name a few. I’d be interested to hear how others are...
Got the chance of a tractor , got spec sorted out but tyres seem a minefield , got the chance of Michelin 650/85r38 rear 600/70r28 which I presume can be deflated a lot or 710/70r42 rear 600/70r30 trelleborgs which can’t be deflated as much , tractor weighs around 9 and bit tons , what’s folks...
Hello all !
I am in the market for a haulage tractor to do all my trailer work.
Its main job will be hauling a dump trailer both on and off road.
I am considering ..
John deere 6215r
T7.260
Puma 220
Fastrac
Valtra t214 or 234
Fendt 930
Tractor has to have over 220 horses and front brakes.
Any...
Hello
I Have a Deutz Fahr TTV 430 brought it new 2012 and it done 1900 hours been serviced regularly and it now doesn't like to go forwards up a slope
if I am driving forwards in either High or low range and start to go up or down a hill or slope tractor sort of sounds like clutch is slipping...
Just been talking to local farmer he said local contractor recently had Fendt transmission rebuilt at a cost of £25,000
He also said full artic load of chicken feed is £10,000
I believe chicken feed cost as someone was talking on radio a few days ago not so sure about fendt transmission
We have 6 different tractor makes. All different ages from new to old. We have part used oil drums everywhere all different stuff. Is it possible to get one engine oil and one backend oil that will do them all?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.