cvx

  1. W

    thinking of buying New holland T7 190 or 210

    I have a 15 plate new holland t7 185 range command not touched the tractor yet apart from servicing ,but needing a bigger tractor , wondering how do people get on with power command and auto command ? I went for the range because I thought It was less to go wrong are my asking for trouble If I...
  2. Finn farmer

    Dealer having a laugh

    So, i went to the MF dealers depot, our old salesman has given up on selling tractors and is now selling implements only, so a new salesman sits behind the desk. I offered our 2018 Case Maxxum 135 Cvx with 3200 hours for trade-in for a MF 6718 Dyna-Vt Exclusive. Cost to change came to 75k€ inc...
  3. B

    Case Puma/NH T7 equivalent.

    We have owned a Puma 185 since 2012 which has been a very reliable machine. I am beginning to think of adding another tractor because my older JD tractors are getting long in the tooth to rely on. Two questions I would like answered are which T7 NH is the smallest LWB tractor? Secondly are the...
  4. B

    Case Puma/NH T7 equivalent.

    We have owned a Puma 185 since 2012 which has been a very reliable machine. I am beginning to think of adding another tractor because my older JD tractors are getting long in the tooth to rely on. Two questions I would like answered are which T7 NH is the smallest LWB tractor? Secondly are the...
  5. jackward6170

    Pronto or Rapid?

    I’ve seen the threads in here before about this subject but which is better suited to me? We plough prettty much everything except top work for OSR and grass, on heavy clay mostly. Currently running 4m polymat combi drill which we’ve had years but after something abit quicker in a drier time and...
  6. Bobthebuilder

    Landrover

    Have a 13plate defender 90td with a tick over issue, have changed the fuel filter blown fuel lines out from engine bay back to tank, when running it will excelerate well and goes up to 70+ no problem but will not tick over without cutting out, any ideas 😏
  7. roscoe erf

    Good or bad idea

  8. M

    CNH GPS

    Looking for CNH 372 receiver and nav controller to make a steer ready CVX steer.
  9. M

    Steering for a CVX 230

    Have just bought a 14 plate steer ready CVX 230. Don't need section control etc, just steerage. It has a 700 screen, roof plate and valves. Looking for some advice please?
  10. Frankzy

    Case CVX 1195 opinions

    We recently stumbled across a very tidy looking 2006 model Case 1195 with 6k hours on it but since I've only had experience with the Puma's I figured I'd ask here for views and opinions on it. I know it has the same Carraro front axle that has given Claas some problems but I think all those stem...
  11. T

    case maxxum 150

    I have a 2016 case maxxum 150 but find it underpowered , anyone else find them underpowered ? anyone remapped theirs and did it make a diffrence ? thanks
  12. H

    Case Optum 300 user opinions

    Hi, was wondering if there is anyone on here running an Optum and what there opinions are, they seem to be relatively good value secondhand with 2000hrs on them. Main jobs would be power harrowing, mowing and tankering. TIA
  13. A

    Valtra t214 v 254

    Why is there a big price differance in a 214 and a 254 , there the same tractor except for the pto power, has anyone bought a 214 and tuned it up to a 254, Also the pros and cons of deleting add blue on a valtra.
  14. B

    T7 50K bearing.

    Hi. Does anyone have a picture of the notorious 50K bearing location. I take it as hitch dropped and back plate off, where exactly to go then? Thanks
  15. S

    Correct way of driving John Deere IVT/AutoPowr ?

    Can someone from JD or with very good knowledge about it clear once and for all how to drive those gearboxes coz I see a lot of youtube videos slowing down with the lever. My way of driving is full hand throttle in the field, on headlands I press full foot throttle to the floor and move hand...
  16. YELROM

    Idiots guide to Ez steer

    Looking at getting an Ez steer wheel motor to go with our Trimble 250 with a ag15 antenna we have just got. How accurate would this system be with an Ez steer, i assume i would need tilt compensation but looking on line most seem to be fitted in the cab, does cab suspension affect them by making...
  17. JCfarmer

    Folding Combination powerharrow/drill 5m or 6 on Puma 240?

    Interested to hear peoples thoughts, there is a chap on youtube running a Kuhn 6m with a weaving tine on the back and behind a New Holland T7 245 I think. 1.5t hopper on the front balances it well. The New Holland is one down from a Puma 240?
  18. W

    Case or Massey

    Always been Massey done us well with little bother.but the case man has been and dangled a big carrot-a 165 multi controller front links .pretty much same spec as the Massey .but the case is a nice bit cheaper.the case seams to be a no brainier.thanks for any comments
  19. W

    Case or massey

    Looking at a new tractor.dad all’s had Massey all ways got on well with little bother.but the case man has been and got a165 multicontroller and its a nice bit cheaper than the 7718 Massey.same spec as near as dam it.what do you think.???? That for any comments
  20. jon9000

    Folding 4 meter combi recommendations

    After another wet backend I've about given up with the rapid..... it's a real pita in wet Octobers. Still a great drill and I'm intending on keeping it as you cant have too many drills seeing another post. A guy local to us has a solitaire 9 which looks a great drill. Its main job will be...
Top