disc

Whats everyone elses position. The wheats looking really hungry now and its so wet wondering whether just go and make a mess or be patient?! Must be loosing yield surely.

Just wondering about the justifications for vehicle towing limits. Last week I took a couple of steers in with my Freelander 2 and IW trailer. To be honest I was probably (!) close to the limit as it has a towing capacity of 2 tons. However it went like a dream, I hardly noticed the trailer...

This is what a surgeon uses to remove excess bone in order to repair a finger after a chopsaw has being used carelessly. Due to my own stupidity I have had 2 days in hospital and a horrible operation under local anesthetic not to mention all the inconvenience I have caused for everyone else...

Good afternoon and thank you for allowing me to join. I have a sanderson t2 11.40 which goes lovely backwards, but seems to lack power or grunt hoing forwards. It has a crt 4 2008 transmission. A forward/reverse lever on the steering column mechanically moves a lever on the side of the gearbox...

Are you able to partially fill a grain trailer before connecting with a tractor? We have 2 grain trailers to be filled from a stationary machine, will we need 2 tractors so there can be one tractor per trailer or can we just switch over the trailer, empty the first then go back to the one...

anyone got a disc drop off setting for a KV geospread using polysulphate. Unfortunately it hadn’t been delivered when we did a tray test. Have done a shaker box test but nothing comes up close on the app

Hi there We have been advised we need to move from S4 to S6 disc's to spread urea now we have moved to 28m from 24. So do I need complete new disc's or just a set of vanes? (not a mechanic :()

Well I have succumbed and spent day crawling around under the drill swapping it over to wet weather kit. I moved all my land to become spring barley after harvest as combines made a bit of mess and needed to reset. Hoping the twin tune kit will get a bit of air in the soil without peeling up...

I thought that the ranger was the first claas coloured telehandler. Who made this and is it any good? https://www.troostwijkauctions.com/l/1995-claas-486-verreiker-A1-16932-95

Who manufactured disc gangs as an accessory for taylor way chisel plows?

Looking to wind up some HT sheep netting to reuse elsewhere. I know Quickfencer make an attachment with a hydraulic motor that is supposed to make a tidy job of it. Are there any other options that I’ve overlooked?

Looking at buying a 24 row Erth direct drill for direct drilling grass into burn off and for stitching, slightly concerned about the spacing on the 24 row machine versus a 32 row machine, is there much of a difference in establishment ?

Moore Unidrill DP400A Advert added by: Machinery Details Category: Tillage Drills Price: £22000 Condition: Excellent Description Moore Uni Drill 4m working width hydraulic folding disc drill. Popular direct/conventional drill. Owner...

Had the 6480 out for first time in nearly 3 months. Had the dump trailer on and when turning right off the road while braking there was a deep groan from the brakes. I thought it was the trailer brakes but tested it again without the trailer and it are the same noise but only when turning while...

So to get our heads around how useful this support offered by Rishi yesterday, who plans to take advantage of the FETF capital grants this year ...

Can I disconnect the drive to the front hydraulic pump and run the engine briefly or will bad things happen. I have acquired a strange vibration/drumming noise at low revs and I wanted to rule out the hydraulic circuit. Cheers

This is written in the hope that it will induce drought like conditions... But anyway, anyone regularly broadcast and harrow spring corn in? I have barley and oats to go in, and the spring tine is going to be the only machine that will go, if it carries on anything like this.. I know, I...

Hello, I recently bought Joskin Modul02 11000 ME from Austria year of production is 2008 . Since it's my first time using the Joskin slurry tanks and using the trailing shoe I did not know that there was a macerator and that it needed to be (in my case) powered by hydrulic pipes from the...

Hi all I Have a clutch on my 6120 that wont disengage properly. This one is springloaded, it drives ok but gears are hard to get in. I have a movie when pressing the clutch but I cant upload it here. Any tip would be nice.

I'm in need of a good chain and combination lock to go round a gate, one that cant be cut through (easily anyway)? Any recommendations?