We have had problems with the lower load Control Shaft seals ( 3 point hookup arms) on a 1986 John Deere 250 Tractor. There is a shaft that passes through the very bottom of the Transmission/ Differential case that the load arms attach to. We had the shaft & seals replaced as damaged, then it...
I’ve recently had my haylage analysed by feeding company that I get ewe rolls off. They have also put me together a feeding plan of what I should be feeding before lambing. I know what I would normally feed pre lambing and it’s considerably more. Was also told that the haylage isn’t a great feed...
I ask the above as @Farmer dyke and @Gerbert, have explained in answer to my thread “River/dyke cleaning,Question for farmers in Holland/Netherlands, that the “Waterboards”, dictate how waterways must be “Cleaned”.
So repeating my self, why is the UK Environment Agency so so opposed, hell bent...
beef
cows
diesel
drainage
drift
environment agency
environmental
flooding
gas
gates
health
health and safety
hedge
landowner
landowners
liability
maintenance
management
parts
planning system
pollution
rainfall
repair
transport
https://www.bbc.co.uk/news/science-environment-68215777
I can think of two sprayer operators who got to early 60s but no longer with us, both with chemical related body conditions, is this a national wide scandal?
I think the time has come to try and move forward with our sheep to try and improve our recording have been looking online and see the Agri dent apr600 with TGM software look best to suit our needs but with absolutely no experience of these things any advice is appreciated! What we want to be...
Written by CPM Magazine from CPM Magazine
Download PDF
One way to brighten up the dreary month of January, as it turns out, is to be surrounded by endless amounts of shiny new machinery, something LAMMA 24 had in abundance. CPM reports on some of the latest launches and UK debuts from the...
I’ve just brought some tanks for collecting rain water and I’m going to get a filter to go on the intake. Do people filter it out as well, don’t want lots of nozzle blocks. We’re in a hard water area so hoping chemicals have a better effect.
How many people are dreaming all this crap up. What are they being paid , ??
It's ridiculously complicated, unnecessary bulls**t , just finding themselves highly paid jobs whilst trying to f**k us up in the process. Agents will be laughing again. .
Makes my blood boil , this country is...
My understanding is that you need PA1 and PA6 certificates to be able to use 'professional' herbicides from a knapsack sprayer. Fair enough I suppose, though I do slightly question whether there is any serious risk to any living thing (other that the thistle onto which you spray the stuff)...
Hi all, went to use the mini digger last week and realised it would not move after firing her up. Popped the bonnet to check why and discovered the top hydraulic hose going to my oil cooler had sprung a leak leaving me with no hydraulics.
Realising this was a candidate for replacement, I...
Worth a watch - I watched part one tonight and it focused on Shirebrook pit & village and the division in the community at the time
Some parallels from 20th Century mining, with farming in the 21st Century
Break the dominance of the miners and then close the pits (despite those pits sitting on...
Daughter spotted 7 people and 3 dogs running loose in a field behind our house, all yapping and sheep in adjacent fields all huddled up and stressed.
Bear in mind we have 1275 pregnant ewes on the farm but not in this field. Gates locked too no footpath. pee'd off I shot round there in gator...
Against U.K. Agriculture?
Make standards and regulations for home production so high that we can’t possibly compete with imports as there’s no identifiable premium for home production.
Allow imports in that don’t meet our standards so are inherently cheaper to produce.
Apply tighter and more...
When did the government overreach and interference start, that's lead to all the hassle we all have now from other bodies thinking they own us or what we grow before we have even sold it?
Obviously WW2 and WW1 we were about starved out so the government had the war Ag committees etc. But were...
This poll will only represent views of TFF members however I note there are 65,000 TFF members compared to 45,000 NFU members. If anyone has any sensible additions to the poll then please speak up. I have set the poll to allow 2 votes as some of the options are similar and not contradictory...
Got a stripped thread on front stud on 312. Nut still on.
What's best course of action?
Remove nut and run on 7.
Weld nut on and hope to wind out stud?
Another plan?
Written by Richard Halleron from Agriland
The Agricultural and Horticultural Development Board (AHDB) is currently listing six new malting barley varieties.
All are under evaluation by the organisation’s Malting Barley Committee (MBC) – three for brewing only, two for brewing and malt...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.