What’s the longer term view of what is going to happen with prices?
I’ve been around a few dealer yards over the last week or so and generally they all seem to be trying to reduce stock levels. They are reluctant to trade things in and the amount of times I’ve heard ‘you’d be better off selling...
Trying to upgrade my Isobus sprayer through the UT - have my USB-stick in the Fendt terminal, but i cant get the files to show up. Does anyone know what filesystem the stick must be in? Exfat? Fat32? This is a Fendt 516 from 2014.
Help me understand these figures please.
If I’m using a 728 pulling a press on ploughing, so it’s working to its maximum all day, can I assume it will be using more fuel per hour than its predecessor? Am I missing something or is the 728 using 1.5 litres an hour more than the 828.
We completed a Q & A to provide guidance to farmers with @James_ from Carter Jonas. Find details below and use the provided buttons to register for our upcoming webinar which will looking into this in a bit more detail.
Good evening,
We equipped our AGI-4 receiver for RTK by adding an internal GSM modem and a gyroscope. We have an X25 console.
We have a GSM reception problem, the modems only receive 2G instead of 4G. We are more often in Egnos when in RTK
To overcome this we would like to add an external...
I am upgrading my Fendt rtk so it can get 4g signal as 3G is being switched off. I can’t find which deutche plug or pin out to connect my Teltonika modem to the current system. I don’t think it should be too complicated! Any help appreciated
At a meeting last night discussing rural issues.
Part of the meeting we discussed the farming scene and how tough it is .....
2 of those present suddenly spoke out at what they had seen in various 'farming' type mags and market reports' about livestock making record prices in markets etc etc ...
This 5yr old drill which is 4m wide is £70k. What on earth did it cost new? Has it lost nothing in depreciation?
https://eastern.claas-dealer.co.uk/used-machinery/horsch-avatar-4-16-sd-hs-21331357-a-01
With the way things are and no improvement on the horizon ,how long will it be before a huge dealer shuts up shop.they mostly got very large expensive premises and massive stocks of parts and machines but they will be suffering the same as the smaller dealers.seems to be a weekly occurrence of...
Using a Chafer Guardian sprayer with Teejet controller on Fendt section control. How do I get the sprayer to turn on straight a way when starting off in corner’s please without having to put it in manual and then switching to auto when I get some speed up. It won’t spray below a certain speed...
Fendt 415, been spreading fert all afternoon, tractor running fine. Got finished and parked tractor up. Went back an hour later and it wouldn't start. Seemed like a flat battery, so I got another tractor to jump start it. Turned the key and just the same on first try, then it started on...
Bit of a silly question but basically would a 6 cylinder 150 hp tractor use 50% more diesel than a 100 hp 4 cylinder both doing the same work say a 3m power harrow in same conditions. Roughly same age of tractor’s.
Hi guys
First time to post here so please forgive any mistakes before hand
I work with deutz fhar tractors and a customer who has a large fendt fleet wants to transfer his fields from his fendts( 2022/23 724s) on to his imonitor3 in his deutz (x35 topcon) I am not familiar with the agrirouter...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.