ferguson

Hi all, The front windscreen is broken and needs replacing but there seems to be a selection. We have measure the opening as attached. I have spoken to supplier and its been narrow down to two that are 5mm difference in size, which one though? Also has anyone done this before? Whats the...

I am looking for help and advice on fitting a loader to a Massey 390 2wd. I have attached a photo of a quicke q710 loader in mind that I could buy but it has US style brackets that came off a 290 with extensions to the back axle. I am wondering would this fit? I would like to go with US type...

Here is a little chistmas diagnostic mistery for you, it takes some time to explain so bear with me. I have an 2010 MF 5455 Tier 3, about 5000hrs, with some issues i cant figure out. It all started a couple of weeks ago, when winter temperatures really had set in, with about -12 degrees...

Got myself a brand new 5S recently but i'm afraid I'll end up with hernia around Christmas if I don't replace the door strut. Anyone who can recomend a softer one? Or will it soften enough in not too long time?

Hi We have a MF35 4 Cylinder Diesel and we need to do an oil change. What oil can I put in this and what are the recommended oil change times. Any help would be appreciated

We have just bought a Massey 7718s and I’m wants to fit a set off air horns to it and I don’t know where to tap into the air pipes for a constant air feed could anyone help

Hello all, here goes my debut post. I’ve had a good trawl before asking here, so maybe someone who knows far more than me can chime in. I have recently purchased a MF 3070 and I’m looking to compliment it with of a front loader. I’ve been trying to hunt down some documentation or advice on...

Here is my Little Grey Fergy that I have owned twice, I purchased it in 2018, then decided to sell it, due to having to many other project, something that I instantly regretted. Then in June 2019, I spotted it while looking on eBay, and decided I must have it back. The person I had sold it had...

Hi, I know this has come up many times but this problem seems to occur in different ways and on different levers. The hare-tortoise-1234 manual gear lever is stuck in 1-Hare. I cant change 1234 gear or move it between hare or tortoise but i can move the shuttle a/b gear lever. The problem...

Sorry long one Hi im thinking of tackling the brakes and hand brake discs all in one go. Only ever done this sort of thing on small tractors so im a little nervous. I have seen lots of scary posts about metal fragments going through the system. My 3095 is one of the early ones with only the...

Hello! Translated a page with MF 390 Synchro-Power gear sift and heater motor repairs. Something about hydraulics too. http://www.haapasalontila.fi/MF390hydraulics.html

Hello Can I just get rear tyres for a vintage tractor at any place or do I have to go to a specialist place.

Hello! I've translated part of my MF homepage to English, other parts are still in Finnish. Plenty of pics there too anyway. http://www.haapasalontila.fi/MF590hydraulics.html Please let me know if I've written something very funny. Greetings from Finland!

Hello, first post here! I'm trying to find a glass fuel bowl for a massey Ferguson 130. Annoyingly I can find loads for the 135 (British built) but nowt for the 130 (French built). I've phone many different part places and some even have a fuel pump for the 130 but none have the glass fuel bowl...