Morning all; just bought a Horsch Sprinter with the 2 guide wheels up front; instruction manual seems a bit useless-at the ends do you lift the tractor arms up and then drop again in operation and when drilling do you set the arms at a height so the guide wheels have a little weight or put them...
Got a tractor for a demo it was dropped off when I was busy so haven't been shown what to do my fault not the dealer before anyone says anything.
Is there an easier way to change the cruise speeds other than going through the screen??
I just wondered if it’s worth changing our mouldboards to no.28. We are wanting to turn over the soil a bit more and was thinking that the 28 would be better also are the trash skimmers better for burying grass?
John Deere 6250r Ultimate 2018
Advert added by: Ed Beckett @Wheatland
Category: Tractors Farm Tractors Price: £87500 Condition: Used
2018 6250r Ultimate spec with full activation and 6000 rtk dome. Hydraulic top link, front linkage...
Just about to buy a lorry purely for tractor & plough transport. Who is best for insurance? and what should I be paying?
Called the NFU this afternoon and wasn’t impressed with £1,600 quote. Must be able to do better than that.
18t, limited mileage, kept in locked farmyard, good history, happy...
Which would you choose....
4 year old tractor 5000 hrs or
15 year old tractor 5500hrs
Both regular serviced, both similar hp
Only real difference is that the newer one is adblue
Thoughts of the forum greatly appreciated (y)
Mrs LS was pushing a heavy shopping trolley up the slope of Morrisons car park this morning and a car immediately behind her blew it's horn. She nearly jumped out of her skin as she had no idea that it was there. I thought that when electric cars were in their infancy, there was talk of them...
I have a KV LD85 four furrow plough set with 14" furrows. I can hire a neighbours tractor on 520 / 70R38 rear tyres. They are set at 51" inside wall to wall.
Is the tyre too wide for a 14" furrow? They look a bit wide to me for making a good job of matching up the bouts.
I have just fitted a loader to my 135 and just a few questions, please
whats the options and opinions on a powered steering upgrade, with the loader she is very heavy?
I have also lost some traction on the rear end, spinning while backing up with a loaded trailer?
and finally, what...
I'm thinking of changing my trusty cx860 (2002) and just wondering what to change it for. NH model numbers keep changing and I'm slowly losing track of what would be similar size and out put. Slightly narrower on the road would be nice and have wondered about a smaller rotary but i have a...