hydraulic

Afternoon, Telehandler (02 masssey 8937) which i think is a bobcat in disguise has managed through a proccess of a loose pipe clamp to turn one of the steel lines in to a peice of art! :rolleyes: Anyone know where i could get parts or genuine replacement? TIA!

I've been having trouble with my backend oil overheating on my 7840, seems to have only started since I setup the loader direct with the load sensor. After about an hour the dash warning light comes on, leave it 10 minutes & all is good again for 15-20 min... Anyone had this on a 40 series...

Would anyone have the calibration procedure for the rear linkage on a ford 7840? I cant seem to find it noted in any of my manuals Since I unpluged the effort control multiplug last week, the linkage in its lowest postion reads 80 on screen & 99 at its highest so almost no lift but no error codes.

Hi , I have an old SAM 2000 lowline self propelled sprayer ( 1996) it’s is /was a great machine until the back right hydraulic motor decided to give up on me . I was wondering would anyone have or know where there would be 1 of these for breaking or even of any other machines that the same...

Hi folks, Looking for any help, I've to replace the hydraulic pump on my Zetor 5211, straight forward job. However, after removing all the bolts on the plate underneath the tractor, the plate will not come down. Its like there's another 10 bolts holding it up!!! I've checked a few times now...

Hi everyone, I’m from Belgium so pardon my incorrect use of English! 😊 My friend and I recently bought a secondhand Massey Ferguson 3060. Yesterday we started mowing the grass and the hydraulic system failed also as the steering (we say ‘servo-steering’). It ‘s the first time we used de MF for...

I own Massey Ferguson 4455 and lately I have noticed that the oil from hydraulic reservoir is somewhere drained direct to the gearbox, it doesn’t leak to the ground. Those systems should be separated, but any guess where are they connected together? What could be broken?

Hi folks. I am new to this forum and forums in general. I am looking at purchasing a 1960's David Brown 880 implematic. This tractor has NO loader or no remote hydraulics. I want to add at least remote hydraulics to this tractor and I am wondering what would all be involved in this process. I...

Hi, I have a CX105. Until a few weeks ago, when tipping a trailer (not a heavy one, and with just straw on it) once it got to max height, the lever in the cab always automatically shifted itself back to neutral, it's stopped doing this now, wondering if anyone may have any ideas where to start...

I have been trying to suss out what hydraulic oils to use on my machinery. I have a Claas tractor (dyna 6 Transmission) and a JCB telehandler. I have been buying oil from my local dealer but also do a lot with industrial oils and can get them in volume at a much better deal but cross referencing...

Hello, I am having a problem with my Massey 4260. The rear hydraulic arms are not lifting any weight. They will lift when empty/very little weight but will not go to the full height with any weight on. Has anybody expreienced this problem before or know how to resolve? Many thanks in advance...

Hi, I'm new here. This is probably the most basic basic question there is, but here it goes. Can someone explain the couplings signs in this MF 2640 and how they work ?? See photo. And also how to hook a reverse plough's hydraulic hoses to this tractor. I tried hooking to the "+" and "-"...

Hi i have been working in our woods and a stick has snapped a hose off the side of the trailer brake control valve. Ive managed to get the bit of thread left inside out of the valve but none of the hydraulic firms around me have the part. They say its a special adapter most likely witha designed...

Hi there im after some advice, as the post says im putting a techneat avadex applicator on the back our horsch, what id like to know is this, how do i join two free flow returns together as the drill has one at the moment for the fan and the techneat will need one, it may be a simple solution...

Dear all, I have got me self an old-timer Sanderson Telehandler that seams to be as old as I. There are more broken stuff than things that works !!! so I am in the deep end of the pool at the moment :-) I wondered if any of you good members here on TFF can give me some info on where to...

Hi, tasked to build a front mounted umbilical reeler for 600m 5" pipe, I have rough measurements from a Storth catalogue but could do with some hard measurements! So if anybody can help with the following I would much appreciate: Reel diameter Width of inside the reel Hydraulic Motor used...

Hi, suffering from very worn hydraulic couplers on our 7710, basically its pouring oil out around the levers, pops out and there all now equally tired. About had enough today because found myself in a sticky situation side on a steep slope and the hydraulic ram that holds the flail mower out to...

Can anyone recommend a tractor breaking firm, or know of someone breaking a Ford 5000? I'm after a complete hydraulic top cover with quadrant leaver still attached/fitted. Working condition before being laid up. Waiting on a reply from Rusty Parts but they seem very busy, waited two weeks...

Hi, anybody know where to source a ram seal kit for a MIL model H? Thanks Mike

I want to use my International B275 on my KV match plough. I'm wanting to know how to plumb in the hydraulic spool block. And if the hydraulics would be good enough. I also have a 135 with a weight block on and wondering if it would be easier to set up the hydraulics and would handle the plough...