international

Novice International Owner - purchased in the Autumn from a chap who he’d stripped the engine and fitted a new head gasket etc i’m now starting to put it into use but after a few runs the engine has just died? Checked the fuel tank and while it seemingly had a fair bit in the bottom of the tank...

Hi all, I’ve got a case international 685 and I’m not sure if it’s a 84 or 85 series but agriline says its an 84 series. How do I bleed the system after I’ve changed the fuel filters and does anyone have a exploded diagram of the fuel lines.

Hi all, we're having some issues with what we think is a dead TA unit on an 885XL, but would appreciate some more knowledgeable folks' input Backstory: About 6 years ago we bought a 1990 885XL 4WD from a used machinery dealer. At the time we didn't know much about Case-IH tractors so didn't...

Hi - I've got a topper mower that I'm using for the first time, and I think I must be doing something wrong. I'm hoping it's something obvious and I can hold my hands up for being an idiot. I've got an old International B250, and I believe I have a PTO speed of 540 on this. The PTO shaft from...

VLC VL Churchill special service tools required Any condition To buy, but would be interested to rent or borrow with the idea to reverse engineer and compare to original tool drawings for production for classic and vintage vehicles. I own VL Churchill I bought it in 2020 and I am busy...

Anyone know where to get parts for an international 955 in Ireland Thanks

Hi, The MIL Master loader on my 1970 International 434 has ruptured a hydraulic hose. Anyone know what type / size of hydraulic fittings this is likely to have so I can order a new one? (and probably replace the rest too!) Its one of the hoses which attaches to the bucket rams. Many thanks Jonny.

Hi all, Cody from Farm Xport here (www.farmxport.com). We are an international distributor for Soil-Max plows but would like to expand our catalog. Is there any farm equipment or machinery, worldwide, that is difficult to purchase in the UK due to lack of import or distributors? I imagine most...

im currently refurbishing a case international 5140 maxxum powershift and it was eunning no problems and then today when i jumped in it after changing the belts and adding a new creeper gear lever in the tractor wouldnt start the lights come on as they should on the dash however never had the...

Howdy, I just wanted to share a video I made showcasing the way I still use my classic Farmall tractor. I hope you enjoy it and consider supporting my YouTube Channel by commenting, sharing, and subscribing at youtube.com/c/OurPassThyme . There you will find about 25 or so videos I have made...

Hi I've recently bought a 1959 International B275 to use around our smallholding. The previous owner must have been fairly short as the seat is in the most forward position. I'd like to avoid bashing my knees so would like to move it back. There are clearly three positions for the seat and it...

Hello, I've come across a rare type of summer livestock feeding. I found a video on youtube, of a dairy farmer, and he mows the grass, and directly loads it with a forage wagon. Not so rare so far. But then he uses a corn chopping machine, and also loads corn directly into the forage wagon...

Hi TFF, I'm looking for some advice on my IH 454. I think that it's down on power. I used the tractor for some topping and it was struggling with the work of the topper - it's only a 5 ft flail topper. I had my local mechanic out to have a look, and he could not see anything really wrong...

hello, does anyone have a stub axle for an international 2350 tractor?,[right side} or complete axle. This is the industrial power steering model. Thank you.

.My son (13) is very keen to start ploughing with a view to eventually competing with our newly restored 1966 IHC B275. What do people think of the B12 plough as a suitable plough for this purpose or would a Ransomes (Robin or TS59) be a better option? I'd love to here your thoughts. Also might...

I want to use my International B275 on my KV match plough. I'm wanting to know how to plumb in the hydraulic spool block. And if the hydraulics would be good enough. I also have a 135 with a weight block on and wondering if it would be easier to set up the hydraulics and would handle the plough...

hi guys, I've a 1959 McCormick International B275. I put a new battery in it and when running the ammeter was showing discharge. I had it in negative earth. My manual says positive earth, when I swapped it around the ammeter showed charging. However overnight the battery has been totally...