isobus

  1. Farm Classifieds

    2M039601 2020 MASSEY FERGUSON 7718S EFD6 4WD TRACTOR

    2M039601 2020 MASSEY FERGUSON 7718S EFD6 4WD TRACTOR Advert added by: Chandlers (Farm Equipment) Ltd Machinery Details Category: Tractors Farm Tractors Price: £87750 Condition: Used Description MASSEY FERGUSON 7718SEFD6 4WD NEW EFFICIENT TRACTOR, 3.2T...
  2. Agriimark

    changing screen layout on valtra smart touch

    On a different tractor this week and previous driver has got the guidance running through the screen in the command arm. i want it on the second screen but can't figure out how to move it 😂 any help will be appreciated.
  3. bartdereu

    Fendt Section Control , read data trough canbus possible?

    Hi all These last few weeks i've been learning allot of the canbus of Fendt. I've managed to control all hydraulic valves trough the canbus. Now i wonder this : If my tractor has section control active, is it possible to get this information over canbus , so that i can create a controller that...
  4. G

    John deere 6250r

    Looking at buying a used 6250r, 4000ish hrs, are they as good as they're cracked up to be? What are people's experiences? A future classic?
  5. S

    Can I use G5 screen from JD on John Deere G4 tractor ?

    I dont see any discussion on that matter. Can we mount JD G5 or G5+ screen on Gen4 command arm ? If not, can extended G5 monitor be used with G4 machines as they have no brain but just show screen. If yes, anything else needs to be done or just plug and play if same cable ?
  6. Clive

    split ISO ?

    anyone know if you can run x2 ISO machines at a time on a tractor / x1 ISO screen ? if so can you get a splitter cable ?
  7. J

    JD 6210R upgrade to GreenStar ready

    Hi, does anyone knows which wiring harness do I need to make my MY14 JD 6210R GreenStar ready? We have a non-touch GS3 command center but it's not clear which harness do we need to connect to an ATU 300 and a receiver. Any hint/help much appreciated. Thanks.
  8. CPM RSS

    On Farm Opinion: Moving with the times

    Written by CPM Magazine from CPM Magazine Download PDF What’s the result when combining a carbon removal specialist with a Scottish agricultural contractor, a fleet of Fendt tractors and a ready supply of volcanic rock? The answer is, a new way to create carbon credits. CPM finds out more...
  9. CPM RSS

    Drills: Dynamic drills

    Written by CPM Magazine from CPM Magazine Download PDF Innovation never stands still and with focus moving towards environmentally conscious management, the drill and planter section of the machinery industry is no exception. CPM takes a look at some of the newest products and updates...
  10. Agriland RSS

    Machinery Focus: Sky Agriculture keeps Sulky simplicity

    Written by Justin Roberts from Agriland Amidst all the talk of the wonders of technology and how farming is being transformed, it is often overlooked that it has to be operated at farm level by people who are not as versed in software engineering. There are a few companies which are now...
  11. Agriland RSS

    Lemken declutters the inter-row hoeing cab with new software

    Written by Justin Roberts from Agriland Inter-row hoeing has been receiving a good deal of attention over the last few years from manufacturers. It is an operation that is ripe for adaption to digital technology, and Lemken is no exception. In a bid to further improve the ease of use, the...
  12. N

    Intelliview4 section control

    Trying to get the section control up and running thru isobus terminal to operate bogballe spreader. Have entered activation code successfully but the spreader and map arnt communicating. I think I should have a task controller and section control tab at the bott of the toolbox but its not there...
  13. T

    bredal k 85 + teejet controler

    hi.. we have a 2004 bredal k85, not very fancy{non isobus} but does us well. i was considering getting a teejet gps controller to connect to the bredal for auto stop/start and decreasing amount when reaching an angled boundry etc just wondering if anyone is using this system? we have a spare...
  14. chester

    Section control for Fendt 516

    Are there any other options other than going to Fendt dealer to get section control unlocked for spraying with chafer guardian?
  15. Agriland RSS

    913hp from the biggest John Deere tractor yet

    Written by Justin Roberts from Agriland The latest John Deere 9RX 830 now packs an impressive 913hp and 4,234 NM of torque thanks to the JD18X engine, a powerplant that was launched in 2022 which, despite its power output and displacement, is still a relatively uncomplex straight six-motor. It...
  16. N

    Aeros 9040

    Got a problem with my aeros9040 isobus controller. Have fired it up after couple months no use and the Touchscreen doesn’t work. Can’t get it to do anything. Anyone have any ideas?can I link it to a pc to make any adjustments or maybe do a software update or override something. Struggling to...
  17. News

    Accurate nematicide application more critical than ever as UK potato production faces up to new and diverse challenges ahead

    For potato grower Ollie Dennis, of Dennis (Haddenham) Limited, running a successful 700ha arable farm that includes 400ha of potatoes grown annually for the crisping, chipping, packing and processing markets is about attention to detail and using the best technology and equipment to keep...
  18. Farm Classifieds

    FE000290 NEW FENDT RITANA 160 V XTRA ROUND BALER

    FE000290 NEW FENDT RITANA 160 V XTRA ROUND BALER Advert added by: Chandlers (Farm Equipment) Ltd Machinery Details Category: Balers Round baler Price: £49750 Condition: New Description FENDT ROTANA 160 V XTRA ROUND BALER, E-LINK PRO ISOBUS. TERMINAL, PICKUP...
  19. Farm Classifieds

    FE862105 2022 FENDT ROTANA 160 V XTRA ROUND BALER

    FE862105 2022 FENDT ROTANA 160 V XTRA ROUND BALER Advert added by: Chandlers (Farm Equipment) Ltd Machinery Details Category: Balers Round baler Price: £45250 Condition: Excellent Description FENDT ROTANA 160 V XTRA ROUND BALER, E-LINK PRO ISOBUS. TERMINAL, PICKUP...
  20. C

    Valtra and isobus connections

    Has anyone had problems with a Valtra T235 not being able to communicate with a Khun fertisiler spreader through Isobus?
Top