936 is needing some new IF boots before long. BKTs are coming in considerably less than anything else, 5k less than one brand. Are they worth a punt? The trelleborgs have done well doing nearly 6k hours with tread left but side walls are starting to crack. Never run BKTs on high hp tractor...
A friend is looking for some wheels for his mf 4355. It's currently on turf tyres so the whole lot needs changing.
What options are available/compatible.
Think the factory spec was 34" but are proving hard to find
Specing a tractor 215hp mainly for drilling either with 4 meter weaving gd drill or 4 meter combi which tyres would get the power down to the ground best 650/42 or 710/42 I currently have a 250hp tractor that’s due for replacement and with the rise in tractor prices it looks like a down size I’m...
I'm needing to reboot my jcb310s with new tyres,I'm looking at new Michelin tyres at about 3k,should I consider the semi industrial type tyre at approximately £100 / set more expensive. Are there any cheaper alternatives which offer better value for money than Michelin. I must admit the...
Would it work. Any advice on mf 1200(articulated). What to look out for. I just want to try out fitting secondhand TM engine into a MF1200 cause I need the power and traction for pulling heavy loads up steep hills.
I’m purchasing a 8340 coming on bald tyres so good chance to put wider ones on. Main jobs will be rolling and fert spreading. Very little road work. Will be doing low hours so want to last a good few years.
Question is what would be the best tyre for the job. Thinking 600/65r38 and 480/65r28...
Need new tyres for the loader. Galaxy coming in far cheaper than the alternatives. Either agri tread or industrial. It does mainly yard work but does venture off road occasionally.
Are people happy with their Galaxy tyres?
Looking at a set Bridgestone VF 710 70 42. Not had any experience with VF tyres and choose is limited at its a new build tractor so only being offered Bridgestone or Michelin in VF. I could put a set of non VF 710s on and change them to a set of VF of my choice and sell the non VF ones
Currently has 16.9 38 and 14.9 24 but want to go wider. Looking at 520/70 38 and 480/70 24? I think those will work but not 100% sure. Will need wider front rims but rears are fine. Will be going down the vredistein route
I am looking at changing two rear tyres on my MF390 16.9 x 38, we don't do very much road work and I am not sure wether to put Radials or Crossply on!
Any thoughts and suggestions of preferred makes etc, greatly received.
Kleber 13.6 r38
2 x Kleber 13.6 r 38 tyres. Approximately 30% tread wear remaining. Sidewalls showing signs of 'perishing' and the usual cuts etc as expected with part worn tyres. One has worn more down the centre of tread (as shown).
£50 for both. Collection only.
It doesn't matter if you're looking up at a shed roof in Australia (where these lights are fitted) or the UK, our LED lights make it a better view. Get your Fendt LED Light Upgrade and Light Bars ahead of #harvest2020 at...
Kleber Gripker 540/65 R30 650/65 R42
Advert added by: JB Tyres
Category: Parts and Maintenance Tyres Price: £2000 Condition: Used
Kleber set at around 50%
How to make contact with the Dealer
Click here to read more about this...
8.3 x 44 Rowcrop wheels and Tyres, 80% Kleber tyres, Pair
Advert added by: Agri-Linc Farm Machinery
Category: Parts and Maintenance Wheels Price: £495 Condition: Used
How to make contact with the Dealer
Click here to read more about...
Some tyre dealers Will look after you if you’ve got an issue, And the manufacturer will keep the warranty quiet ,as normally they carry a three year warranty in the UK .But they will try every excuse under the Sun to get out of it. Just come across some farming papers I brought back from...