I'm needing to buy a couple of new loader attachments. When I bought the tractor/loader, I was told the loader was a quick hitch Euro type. However, when looking for buckets, they seem to offer Euro 8 or Euro 3. Photos of bale handler and loader headstock below. I would appreciate if someone...
I’ve bought a front tank to go with my knight mounted sprayer. Any tips on fitting it? Would you have the pipes on the tractor at all times and would you route them under the tractor or along side of the cab and have them in a cradle that they would simply lift out? The tractor is a mf 6480 and...
How much ball park would it be to put a front end loader on a T6-175 2019 new Holland.
Has the secondary joystick already and is plumbed ready for the front links.
No brackets in tractor at moment.
Hi just wondering if anyone has any ideas what might be wrong with my McCormick cx110 , when I start tractor and put it in forward or reverse sometimes nothing happens, I have to keep moving shuttle till it finally works sometimes if I shake loader it helps but eventually it works , don’t know...
Hello all,
First time poster long time viewer.
I've got a real headache trying to work out some info on a ford 4000 I have. I can't really date it properly as I haven't got the registration documents. I'm trying to get that info so I can register the tractor.
I'm pretty sure mine is a Basildon...
We have just bought an mf 7720s and are mounting a seed pipe up the side of the cab. It is a Pottinger seed pipe with a single mounting bracket in the centre.
On our 7495 we brought a bracket off the exhaust mounting, but this isn't possible on the 7720. The steps don't look very strong due to...
Got a job on the go that's not really thread worthy?
Not a QFB&C?
Not quite a NQFEorAQB?
Whatever it is, show us what you're working on today, TFF.
I'm desperately trying to revive the aircon system on my newly purchased Same but it's snowballing a bit (I probably shouldn't have bothered with...
New Quickie Loader Bracket
Advert added by: B and B Tractors
Machinery Details
Category: Loaders and Attachments Others Price: £750 Condition: New
Description
New Quickie loader brackets,
Spool Block,
Tractor Joystick and Hardware
Came of MF 6713S Tier 5 Tractor...
I’m after a set of loader brackets, any type considered, to suit a John Deere 3200 which I basically the same as a Renault Ceres. Prompt payment and I can arrange my own collection, thanks.
In a moment of madness I bought 2 of them , our hay fields are too far away to move 56 bales , better 400 at a time , so what could I reinvent in to , answers on a postcard please
Hello
I am looking for a set of brackets to mount a quickie 950 loader to my Massey 6270
Wondering if anyone might know where I might get some, I have tried a few places, but no luck or if there are any other Massey ones which might fit. I have seen some for a mf 6465 for sale, any know if...
Hoping someone on here could shed some light before I have to do some more in-depth digging.. Last couple of days my tractor has been making a chatter while driving, only in the 1500 to 1800rpm area, and only under load or slowing down in that rev range... Doesn’t seem to be engine related as no...
Hello, got a tier 3 mf 6470 going to take the loader brackets off to complete some work and wondered how much the would be worth? Owned the tractor for over 5 years and has never had a loader on and never will. Has all the pipe block and electronic control for running off the factory joystick...
Anybody converted a tomahawk to hydraulic drive for use on the front of a loader? I’d like to bed up cubicles that are inaccessible for a large tractor but my Weidemann 5080t fits alright.
Anyone care to share any ingenious ideas / designs for achieving the above? Could buy a narrow bucket for ~ £700 but the capacity is small necessitating lots of scoops or could buy a bag / hopper filling bucket but inevitably expensive ~ £3,000?? Any simple / safe / reliable designs for adapting...
Have had a quote for a John Deere 6130 M and a valtra N134
Both have loaders, the valtra has come in a few thousand more than the JD, I would say the valtra is a higher is spec than the JD but not a lot on it...tyre sizes are the same on both machines.
We have never had any other make but JD and...
I don't suppose anyone knows of a tanco loader boom frame in reasonable condition sitting idle? weve a 978 on a 4wd tractor but ive noticed its cracking in a few places and its been welded before, rather than live on to regret it i'm looking for a new frame as we already have the brackets on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.