loader tractor

Loaded my 14 ft Ifor flat with Honda Pioneer 700, two quads, electric trials bike, 3 chainsaws, petrol hedge cutter, all Milwaukee stuff etc etc …..

There is a ex-council loader tractor with a dealer at Worton, near Devizes. Its a bit of a drive away from me but looks a tidy machine for its age. Is there anyone who lives nearby who might know the dealership?

Is it quite simple to split a 3 metre combi? For good reasons I only have 85 & 95 hp tractors. So no chance with a combi. Is it ok to buy a combi & run the power harrow on one tractor & drill on the other? Thinking 12K budget for 3 metre combi, maybe an A frame to buy? Second hand of course.

Hi all Looking for a 4wd loader tractor 80-100hp must be in reasonable working order budget £18k based in Wiltshire Tganks

Indians still build tractors very similar to MF 135, Ford 3000 & similar Renalt tractors. Why don't they build a David Brown they were much more fun, especially DB 780?

Hello! I'm from Finland and new to the forum. Seems to me like there's a lot of knowledge on Massey Fergusons here so I taught I would try to ask a question. I'm looking for a 6470 as a replacement for our loader tractor. Yesterday I was visiting a dealer that has one for sale with the DynaShift...

Anyone got one ? Any good ? https://www.agri-linc.com/hydraulic-top-link-kit-with-pipes-and-integral-swivel-top-link-eye-choice-of-lengths-cat-2-or-3.html?goal=0_6bc0937e3f-b1a18d08ae-178825097&mc_cid=b1a18d08ae&mc_eid=1991be0601

In the market for a loader tractor if anyone one has anything available budget max 10k ideally closer to 5k the better Thanks again

As above . I say brands,as many tractor brands are under the umbrella of Agco and to a lesser degree Case/New Holland. I am sure some of you will have tried most makes/brands. I must add that I am now semi retired but occasionally help out someone who runs Case tractors and they seem to be not...

Anybody tried or bought one What's the verdict? TIA

it’s always being asked but looking for the good bad the ugly currently running a John Deere 6610 with a loader just shy of 10000 hours and clocking 800/1000 hours a year starting to think might be time for something newer with more comfort and possibly 50k but not sure what to replace with...

So. Both new. No cab. Front loader Solis 50 with loader & NO attachments = 26k +tax Boomer 50, MX c4 loader + new bucket + new pallet tines = 30k plus tax. Use? Small holding. General yard duties. Hopefully haymaking as I'm an absolute fool for headaches 🤣. Why new? All being well will be...

As above. Could use a backup tractor that is nippy enough with a loader and can also pull the 18 ton trailer without getting damaged so no soft gearboxes.. Budget £20k or just over and I don't like changing machines as in my experience they always come with minor and major problems!, so will be...

Hi I need to replace both tyres on my Valtra 700 - small tractor. One is very worn and the other has a puncture. I could get the puncture repaired, but tyre people tell me that I would have to have inner tube and then couldn't fill the tyre with water - which it currently has for ballast...

Why is it for the hours they do it seems all handler makes have a poorer reliability than tractors . I know this involves various generalisations but I have run JCB,Manitou and at present Merlo and at one point this week all 3 of my machines had faults nothing major but two requiring ad...

Bit of a minefield?!? I was drilling stubble turnips other day and suddenly tyre went down on the back of new Holland. Got a gash in the side wall. Could have repaired it but thought tyres 5 year old and few other minor gashs in the sidewall as well. Bought some new BKTs to be fitted today...

I know this maybe the wrong place for this question but there’s no doubt a few of the above are scraping out ditches and doing the odd drainage repair around the farm. Any experiences with either would be interesting as I’m thinking of parting with my McConnell PA8 for something a bit more...

As the title suggests, I’m after a foot throttle conversion for an MF 65. Does such a thing exist, and if so, where can I purchase one from.

Currently feeding cereal blend out using bags (housed cattle, feed passage, into troughs). 330kg/day, twice a day feeding. Getting tired of filling and lifting 20/25kg bags. We have an auger bucket on farm which goes in front of telehandler. Is it possible with the auger bucket to have a...

I am thinking of purchasing an old and small pivot steer - up to 4ft wide for cleaning out. It wont be used very often so as long as its not falling to bits and will last then that would be good enough. Anything anyone recommends or thinks i should avoid?