loader

Can any one help , using a spreader plate on the tanker it is leaving masses of slurry abouta meter wide on the outside of each bowt , lovely and thin and even right across the width but the edges it is too thick .Thanks for any help.

Hi, I am hoping some of you knowledgeable foke can assist me. I have a b25 with a Hymatic type s15 linkage control and isolation. It is badly leaking round the isolation valve. I have tried replacing the o rings with "best fit" from my generic box of of o rings. This worked ok for about a...

Topcon RDS Weighlog 100 Advert added by: Arfon Jones Machinery Details Category: GPS and Farm Electronics Other farm electronics Price: £1000 Condition: Excellent Description Topcon / RDS Weighlog in excellent condition as new. Setup to weigh to weigh trailers...

As above, anyone have any experience of using this trailer to transport a 8.5t digger? Just seems to make sense to take dump trailer and digger together, so you don’t have to keep running back and forth with a low loader. It would also reduce the capital tied up in having both a low loader and a...

Got a telehandler with nearly 8000 hours on it. Needs some things doing to it. It’s due a full oil change, 4 new tyres, headstock and telearm re pinning and bushes. Approx price on the above is £5,000. I’m also a bit concerned about the gearbox/clutch as it’s a bit sloppy on gear change and the...

Written by Justin Roberts from Agriland Kubota is a large corporation with the resources to back the development of its product ranges, both from an engineering point of view and the sales and marketing angle. Yet, it is also Japanese, and tends to be cautious about jumping on bandwagons or...

Fodder beet for sale just south of Northampton £40 over cleaner loader local delivery possible

I have an old (1987) Iseki AT 290 tractor with loader imported to Australia as a used machine. I'm looking for a replacement hydraulic pump to fit. Iseki Japan can't help and I am looking all over. I'm wondering if the same pump was used on other Iseki models. Numbering on the pump is...

Buying a new jcb, went to see it today and they all come on flat face but dealer changes them on pdi most of them time for the usual agri ones (whatever they are called) Would you keep flat Face or not? Dealer has stacks and stacks of spare flat face fittings from doing pdi's so will give me...

…., and having read posts for and against, it’s not worth driving hours to look at a tractor, combine, forager or other large engine driven kit unless you really know what you’re looking at - and even that is likely subjective. Why? Because: What does it prove? Photos and video should determine...

Hello, I was searching tractors in the 150-200hp range and found Claas/Renault Ares Models pretty cheap, under 30k for a 200hp one and I am curious why those models are so cheap, do they have any issues? what is your experience with them?

Can someone please help me identify what kind of headstock this is please

We don’t use a huge amount of straw. Maybe 40 tons a season. For large calf pens. (7) calving pad and colostrum group. Would the savings in straw usage given the ever rising price warrant the dust and cost of some Sort of straw chopper/shredder? all but one pen would be easy access.

Does anyone remember it? As I remember, the inventor was farming some where near Basinstoke. I presume the oil price shock of the mid 70s killed it, but I'd like to know what happened to it, coz the product was good enough to eat! JVM

Aye up, Not sure this belongs here, but unsure where else!! How does it work? I know that coloured pallets belong to companies, especially the blue ones that belong to Chep. I know that the end user is responsible for loading them up when Chep want to collect. I’m kind of wondering (very...

These are a new one on me.

Hello All. I'm struggling a bit. Would anyone know of a loader (with brackets etc.) to fit a 1981 Massey 265? I have trawled the t'internet and there are a few booms about but struggling a bit for the rest. Thanks in advance.

I have quite a few youngsters help me at various times of year. Vet students, 15 year old work experience kids, ag college students, the odd NEET from the county council. Most are ok, some are very good, some are muppets. However the thread that runs between nearly all the youngsters that are...

Hello all Having some overheating problems with my db 990. After about 15mins of work it overheats and it vents hot coolant out of the top of the radiator. But if I then touch the radiator it is all cold. I have had the thermostat out and there was some nasty black fatty stuff on it, so I took...

Written by Justin Roberts from Agriland John Deere is moving digital technology firmly into the everyday tractor driving experience with what were once bolt-on additions now becoming fully embedded into the tractors’ controls. The latest John Deere 5M tractors are now not only available with...