Currently feeding store cattle, various ages, rolled barley, they have different amounts per pen, we bucket it out of a matbro bucket onto the feed passage. Very time consuming and labour intensive. Does anyone have any ideas how we can make it easer while still being able to feed different...
Changing wheel bearings , stub axle threads worn , have put 2 washers on as a spacer to find good threads.
What's easiest way to repair this properly, can I use a die to cut new threads into old ones , use a slightly smaller nut , or Is there a better way.
quick question , what weight will a DB 990 lift with front arms ? i know it lifts a bit more than the 1394 and thats less than a tonne , been asked to lift a tonne bag of sand , but bit of a drive and dont want to get there and find it wont move it cheers
I’m next door to a rewetting project that’s a combined effort or “non effort” between the Forestry Commission, Natural England and the Wolds Chalk Stream project or something like that.
And I’m fairly angry about it as fetid stinking water is sometimes pouring across their plantations onto the...
Evening All.
Its the clueless Blonde again !
Have over 3000 mtrs of Pipe to lay mainly for agricultural use. Has anyone got knowledge of Pipe rippers. You tube makes it look easy !
Any advice gratefully received.
Written by Justin Roberts from Agriland
The nervousness felt in the machinery trade over this year’s sales prospects has not been eased by the latest news from the US where overall tractor sales were down 21.2% over the same month last year.
However, this may not be a true reflection of...
Hi,
Still on the hunt for storage in Cambridge area - CB21 - 5000t store, c.16,500-7,000 sq ft / 1600 m2, min 11 metres height.
Clean concrete floor, dry and with hardstanding surrounds.
Desirable - Weighbridge, Telehandler/Loader and Labour to load IN only.
Tonnage fee and monthly rental...
On the main road. Only a mile from home but six miles from destination, the old HiSpec 10,000 litre tanker’s Ukrainian tyre gave out. It was nearly dark on the Saturday night and had to park it and tractor up on the lay-by. The same lay-by that the Same conked out at a few months ago [it’s still...
Hello,
Ive a NewHolland 8360 & McCormick MTX 140 but im torn between which one to get a front loader installed onto. personally Im leaning more towards the McCormick as it has nicer controls, front suspension and better steering lock.
The only concern was in regards to the front suspension...
Currently have a JCB 526/56 13 reg with the jcbT4-iiiB engine (no adblue) just crept over 7500hrs and in need of tyres soon, contemplating trading it in for something of a similar size physically and capacity wise. Either go again seen a few 526-56 jcbs newer with 2000/3000hr.
Or had a word...
Hello…. As usual i am after a little bit of help. We bought a 3350 a while ago and have been doing some work on it, however it is very difficult to change between either one, two and reverse when the brakes are not used. It is fine if you take the 1-4 lever out and also is ok if you stop with...
Hi
I have a problem on my John Deere 2850 where the Hydralic system keeps building up pressure and it then snaps the bolt on the Hydralic filter which holds it on underneath the tractor as soon as you start it once the pressure has built up.
It first started where the hydraulic pressure would...
From some conversations I’ve had recently, I’m getting the feeling there’s some panick in businesses that rely on farming customers that large scale SFI options could become very popular.
For instance, suggesting that it wouldn’t be moral, or that you wouldn’t be a real “farmer” if you take...
how much of an effort do people make to keep their farm tidy?
what do you do with your oil drums, fluke/worm drenches etc and all other general rubbish?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.