magnum

Our T8050 - basically a blue Magnum is GPS ready ( i know little about it ! ) and has a rectangular plate on the cab roof with a clip each end and plug - what am i missing ? Big screen inside showing gps stuff in a past life - would it be Topcon or Trimble etc - thanks.

Why do manufacturers give such a range of horsepower on tractors that have the same engines/transmissions etc. For example the case magnum / nh T8 rangegoes from 250 to 380 with as far as I am aware exactly the same components. It presumably doesn't cost any more to get it to the higher power so...

Cast wheel centres removed from case magnum 7120 will also fit 7200 range c/w fixing lugs in very good condition, tel mob 07770 797846 Essex near Billericay.

Hi all, we have a case mx200, it has no steering and wont drive at all. It occasionally takes up drive for 3 or 4 feet then jumps back out. No low pressure lights on dash or anything.

Looking for a tidy case magnum 7250. Must have p.u.h. Ideally a pro model. Thanks

I'm currently looking to upgrade my Bonhill E514. What is a good choice? I have owned her for seven years and it's now getting a little much for the old girl. She cuts around 50 - 70 acres or barley in August - September. I was thinking something along the lines of a Claas Dominator. Possibly a...

Can anyone tell me what kind of road speed they've had on a CASE IH MX270? I know they are 40k but just wondered if it's a "just about 40km/h" kind of tractor or if they do a bit more?

Aye-up, Right then, time to make a start. Had the chassis cab delivered on Monday and have been faffing about with paperwork for first registration and MoT exemption. Got all that away and had a bit of a go up the lane with it. Bit of a niggle, it won’t change into low range on the transfer...

Is it better to squash down half the width 2” or twice the width 1”. It’s pretty wet so anything run on will suffer. The eradicators will dig out my wheelings to some extent. Also they are big heavy barstewards that are an utter pain to get on and off, and often seem to be at the back of the...

Written by Agriland Team The British Limousin Cattle Society hosted its autumn male and female sale at Brecon Livestock Market last Saturday (November 14). Of the 22 bulls sold on the day, the average amounted to a total of £3,202. In the female section, although numbers were small, a 100%...

Any tips? I've got a 2 acre lake in one stubble field that has a few hundred greylags and Canadas on & I don't want them stripping off the osr half a mile away. I hate gas bangers and want to keep them for pigeons later on. Rockets? Day + night rope bangers? Luckily there's a chap living on that...

Hello there, We're an export company located in the United States and are wanting to help provide farmers in the UK with water drainage solutions. I'm doing some information gathering and would love to get opinions on water drainage in the UK. We currently carry Soil-Max plows that allow you...

Looking at changing 22 year old 3m maschio DM, lives in front of a Amazone D8 with a piggy back linkage which is absolutely fine for what I do drilling wise and not currently looking at changing the drill. Sounds like price is similar on all the major brands, what is there to look out...

Looking for a new workshop compressor wanting something with a fairly big tank as using it to seat tyres. Can only be single phase unfortunately. what makes should we be looking at. Thanks

I was reliably informed yesterday that both the Democrats and Republicans have are armed to the teeth with huge legal teams with over 500 Lawyers ready and awaiting the aftermath of this coming election results. Both camps have one remit, under any circumstances DO NOT CONCEDE!!!!!! What this...

Wasn’t expecting this in a 3 year old 5 ton linkage that was carrying a 2 ton front weight. They want £600 for a new one including the carriage. Anyone had similar?

If you are fitting a manifold and a new turbo do you use new bolts or reuse the old ones, a good mechanic I know will only use the proper new bolts , says the old ones can be pulled and might not stay tight.

One of the T7 260 has suddenly, whilst ploughing lost drive in all but the very lowest gears. It works hard in 12th and 13th gear and to me it sounds like the clutch packs have gone - although I have not actually seen it. The error code I am told is 2385. What are my options? Are these boxes...

Got a tractor for a demo it was dropped off when I was busy so haven't been shown what to do my fault not the dealer before anyone says anything. Is there an easier way to change the cruise speeds other than going through the screen??

How much hp would I need to pull a 4.6 m cultipress on ploughed land on with fairy steep hills? Thanks