Hello, I want to buy a Tractor from 155hp to 190hp and I want your suggestions about what will be the best option, the budget is 25k, and I want it to work on a 5 or 6 furrow fully mounted reversible plow, I didn't buy plow yet, 6 or 5 furrows depends on what tractor I will buy.
I Have been quoted on 16t grain trailers floatation tires hyd end doors air brakes rollover sheet led lights.
The Bailey is £880.more expensive.
are Marshalls any good?
Hello I have a problem with my own tractor Case 895 (engine D268) The tractor was not using in all winter, now I start it and when he get 40 degrees Celsius it started spitting oil from the bleeding the crankcase. Bleeding the crankcase at the top near the oil filler cap. The 10W40 oil was...
Hi folks.
I’m looking or some advice on the above. New to me spreader on the tractor for the first time. Does anyone have the geometry figures to input into the implement set up? It is on isobus, with the implement modelling set to mounted. The device geometry is showing 0 values however. Are...
I have a t7245 ac which won’t start the pto using the hts. It will stop it ok but I have to reset the start stop switch to get it to restart. Code 007 comes up and the screen says ‘pto switch in the on position please switch on pto’. The automatic pto function is working fine.
Has anyone any...
We have a good amount of straw bedding fym, and my aim is to try make it into compost; buying a purpose built compost turner is out; but I think I might be able to make something??
I remember reading a profi where a farmer bought one brand of spreader due to even spread; and I’d like to discuss...
Might need to change the fert spinner in the near future, most options now seem to be hydraulic opening so might need to upgrade the mighty 148!
Tractor currently only has tipping when put into constant pumping on the lift lever.
A quick Google has brought up two options below, can anyone...
Currently running a Weaving GD 6m and I’m finding it difficult to keep the land level due to its impressive ability to not disturb the surface. Just starting in the 3rd year of spring drilling and the fields are definitely becoming corrugated due to wheelings etc.
Would like to add a tine drill...
We are currently building new cubicle housing for 100 cows and are at a crossroads with regards to scraping out.
My dad wants to install a lely/jos slurry collector
I would prefer to install Storth rope scrapers
My brother would prefer to scrape the building out with the machine.
Any thoughts?
Aft, I came across a pair of virtually brand new Kristeel 183 boards but they don’t match, not even close.
I have another pair that are worn very badly especially on the fronts where the bolt goes through, these of course are like two peas in a pod and match beautifully.
Question is do people...
My ploughing knowledge can be fitted on a postage stamp (if you can find one).
I assume it is a Ransomes? Any ideas? Mouldboards look to be in fair order.
Hiya Im a Film Location Manager. We are looking for a farm with a lovely house / manor, with a large flock of sheep and hopefully some other livestock, cattle, horses, goats ( but not essential ) set in lovely countryside, with barns, stables, argicultural machinery, and they also ask for...
I've taken on a few fields and want to subsoil due to past management decisions. I don't do any currently except where I've made a mess with a 16000 L tanker, and using the shaky legs is just to disruptive to the surface and structure. I'd like a leg that is much gentler in it's approach...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.