I need to remove a 14” diameter V belt pulley from the 30 mm shaft that drives my combine straw walkers. I have managed to get the gib key out with a tapered punch but the pulley is still very tight indeed. It’s cast iron. My hydraulic puller kit isn’t big enough to span the diameter.
Are hub or...
Thinking it might be an interesting hobby for me and the boys to make stuff out of old bikes, toys etc.
Does anyone have any views on models etc?
See some adverts for ones at £250ish
What about running costs, range of metals?
I’ve no experience with tig welders, stick or mig only, done...
NRoSO have changed the rule about collecting points.
You now have to collect 10 every year, not 30 over 3 and you will not be allowed to roll spare points over to the next year.
Yet another "straw on the camels back" of rules and regs. that have to be remembered, not just getting the points, but...
Have an orchard sprayer with a piston pump on it. It has been running at 200psi and even at that pressure, The last two times though the pressure with pulsate wildly and the pressure is all over the place (between 150-200psi) for about 15 seconds and then levels back out again. Pressure is even...
Written by Michelle Martin from Agriland
The herbicide asulox (asulam) has been approved via Emergency Authorisation for bracken control in England in 2023.
Application of the chemical will be authorised from July 1, until September 11, after which spraying cannot take place.
However, to...
...has given you 100% control?
There are plenty of dirty fields out there, but also some very clean ones. Is that cultural as well as chemical?
Interested to know others chemical inputs.
Me;
1l/ha Liberator
2l/ha CC National
F/b
0.4 Sunfire peri-em
Looking for a new tyre inflator, needs to be good quality and a locking valve attachment and locking trigger, does anything exist? I've been looking and can't find anything suitable
Im looking for either a new or used 600 litre sprayer with either 8m or 10 m booms..Anyone had experience of Jarmet sprayers?
Or canyone offer advice on a different brand to go for? tia
A query regarding the induction bowl on my Knight sprayer.
4200L trailblazer, owned from new.
Just been spraying beans with Signum & Epsom salts. Sprayed perfectly and has always been really reliable.
Now I want to wash the sprayer and I’m getting no suction at the induction hopper. Tank wash...
I seem to recall hilly I think had one made , has any one else built one , just looking for ideas, maybe based around a 200ltr blue barrel
I’ve a 95ltr quad sprayer but it’s silly heavy on the back , front wheels are off the ground with no provocation
I usually top up my wheat crops with their last bit of N around flag leaf timing, but looking at the forecast, there's no rain due for over a week. Looks like the season has turned from soaking wet and muddy to bone dry and cracks everywhere.
It's got me thinking if I'd be better to mix the...
A while ago someone showed me an attachment to go on the end of a drain jetter to keep the nozzle in the centre of clay pipes to avoid the lips. It was essentially a 'y' shaped piece of flexible plastic that went over the nozzle.
Does anyone have a photo of one they could share and perhaps...
There's a huge number of respirators available out there but very few seem to explicitly state they protect against weed spray.
Someone please point to some info or H&S manuals etc please.
Full mask or half with googles?
Filter types include
Organic vs non-organic?
Gases and vapours from...
Wanted,
Massey Ferguson 30 3 metre disc drill.
In good working order, small seeds rollers required, plus a bridge link if possible.
Near to Cambridge if possible.
Many thanks.
Before the blight season starts, assess how well your herbicide spray has worked as this can indicate any errors in sprayer set-up, advises
Andrew Goodinson, potato agronomist at crop production specialists Hutchinsons._
“Most importantly, section control must be set up accurately to cover the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.