Evening guys and gals. Something to ponder over and see what you think.
We run a JD962i trailed sprayer and we are wondering how to go about putting a separate tank on it to spray the wheeling/tramlines with glyphosate to reduce the amount of green in the tramline swath at harvest. Thinking of...
Anybody using an N Sensor on liquid fert , if so what nozzles are you running to get a big enough variation to make it worth while, it’s an Agrifac sprayer on a single line so looking for nozzles that can give a good spread of rates without going to too high a pressure to avoid scorch.
I'll start by saying we're not farmers (horsey people but please don't take the mick!), thought this would be a sensible place to ask. We bought some land a while ago, it has got an old but working concrete trough of the sheep variety in it. No one knows where the actual supply is from (no mains...
Minus 7-minus 10 in the mornings at the minute parlour freezing up, quite an exposed parlour, anyone any wise tips for protecting against frost? I thought about putting a silage pit sheet over the units, the milk meters freeze it’s a bit of a nightmare! This cold weather is here for a while too 🥶
Written by CPM Magazine from CPM Magazine
Download PDF
With the move of France’s SIMA international farm machinery exhibition to a November date in ‘even’ years, manufacturers were spoilt for choice when it came to unveiling new developments, with Italy’s EIMA in the same month. With both...
Hi
I’m running a cfx750 and field iq on my self propelled sprayer which is running section control and rate controller.
is there a setting in the screen to allow me to spray when stationary
at the moment It will only spray when moving forward at 0.6k. Is there a setting to allow the sprayer...
Hi
I have telehandler JCB 526-60 , 2014 year, with engine Tier 3i. ( common rail )
Before, there was problem with starting engine, long cranking but engine starts and working ok.
We taked out injectors and give to the repair shop, they put new nozzles.
After this repair we cant start engine...
Anyone had prices to change a telehandler recently?
The second hand is strong, not far off what we paid for it new, but the new is frightening at around the £100k mark.
At 4000 hours with bald tyres they want £40k to change, so £10/hr. Wondering how this compares with machines with more or...
Where is the standard/best place to mount blue lights on sprayer boom to show spray/nozzles etc?
21m trailed sprayer, was going to mount two UTV339 BLUE 40W lights.
Hi looking for a new set of Nozzles for windy conditions primarily for tattie job
Narrowed it down to 3 candidates
Lechler IDTA
Syngenta 3D Ninety
Arag ATC Twin air
Any thoughts or experience in real world conditions for any of these
Thanks
As above. Have a twin bale spike with loose 30” tines.
No way will they tighten or loosen with a 3/4” socket on the nut and a stilson on the square section of tine nearest the tapered bush.
The 18” stilsons are grounded against concrete and there is no way a standard 3/4 drive tee bar is going...
Hi we have a clayton sprayer with Knight sprayer on, teejet 844e controller with teejet section control gps .
Issue I'm having is it won't spray in auto , it always puts too much on ie target rate set to 150 and it struggles to get down to 175 , fluctuates alot , tried different speeds...
Ali from Carsehall Farms spraying Manganese with a Soil Bio Stimulant onto some winter barley but not just any winter barley. With the @New Holland Agriculture T7210 on the front of the @Chafer Crop Sprayers 36m Sentry 5000. The tractor and sprayer are kitted out with @MICHELIN Agriculture...
Looking at updating my trailed sprayer and quite a lot come fitted with GPS section control. Not individual nozzle control. So the same thing i currently have but controlled by satellite (I use a lightbar to help with on an offs). My questions are; is it useful/reliable? I currently put...
Currently applying amistar to all potato crops, however i need to update my up front solid fert hopper, was thinking of getting one with a front tank, however never really seen a big diffrence with amistar so just thought id ask the question. TIA
Basis are taking on the scheme administration from 26th January 2023. City and Guilds finish on 23rd December 2022. Interestingly City and Guilds didn't tender for the renewal. I would have thought this will be a positive move, after the comments made on here about poor cpd point retrieval and...
Will aclonifen (Proclus, Bandur etc) kill 0.5mm emerged wheat shoots?
I know it's pretty harsh as a chemical and the label states it's pre-emergence only but thought it was worth asking the question.
Written by Justin Roberts from Agriland
John Deere has been pursuing the concept of applying herbicides directed by target recognition cameras for several years now, and so far it has achieved some success with its See and Spray application system.
See and Spray works by what John Deere...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.