Changing from 10th to 11th case maxxum 125 2019. Changing down is smooth but going up with load on (plough) it will stop like shown above and then jerk into gear like letting the foot off the clutch too quickly which stalls it. If you do it manually yourself with the clutch pedal it will handle...
Drenagh Farms spreading slurry with the Umbilical System. With the Case Puma 175 on the big wheels with the Agquip system with a mix of tractors carting. Drawing from the farm just outside Limavady down to Myroe. Using one of the farms Herron Silage trailers as a nurse tank allowing the tankers...
Been running this for 5 seasons without any issues to be honest. However since September when the license was updated for the next 12 months it’s not so good.
8kmh and less it seems fine but anything over and it wanders either side of its line. At a glance it looks ok but looking harder it’s not...
As the title says the propshaft bearing is about to go on my t7 230, tier 4b. All I want to know is will new Holland put anything towards the repair ? I'm sure I read on here somewhere that they do ? It's out of warranty. We've caught it in time so it hasn't damaged the shaft so hopefully just...
Thinking of upgrading the M640 to a 7250 or similar for next year as we need something heavier for bigger tankers a 2nd tractor for triple mowers.
We havn't got any Deutz varios yet so I'm curious about how they have done in regards to breakages etc and if there are good or bad years to avoid...
Well done to MF for putting the Dyna VT gearbox in all tractors over 200hp as they are about to pull the plug on all 8s tractors with any gearbox other than a dyna VT fitted in then , because of the fail rate on the dyna 7 & dyna7 eco box, if only they would talk to the end user they would not...
Written by CPM Magazine from CPM Magazine
Download PDF
Tractors are constantly being evolved and adapted to incorporate the most modern technology and to meet the changing requirements of the user. CPM explores some of the biggest launches from the past year.
By Melanie Jenkins
If there’s...
Campbell Contracts - 820 Fendt on the Class Triples
Carsehall Farms - Claas Axion 810 on the Claas Rears & Vicon Front
Drenagh Farm - Case Puma 240 on the Claas Doubles & New Holland T7.245 on the Claas Triples
Braemar Farms - New Holland T6.180 on the Kverneland Doubles
Lyons Contracts -...
Intermittent issue.
Turn key, lights normal, fuel pump runs, 1 relay clicks but starter does nothing. No dimming of lights, no clicks, nothing.
Tow start and it can then be fine for days.
Anyone make suggestions as to where to start looking?
TIA
OG
Was told today of a quote for a new Fendt 728 …….. £280k after discount !
for comparison our last 724 bought 2 years ago was just under £160 and in 2012 a 724 was £110 on farm new
surely the price i heard today can not be correct ? anyone here had a actual quote ?
I now have a MF4255 with Aircon, I have been told never run the Aircon with either the doors or windows open, as it will ruin the Aircon and you will need to keep having it re-charged!
I thought having a door open whilst say fitting a trailer on, wouldn’t cause any problems, to me it’s the same...
Just had a quote for a new NH 315 and Case optum identical spec and the Case is considerably cheaper 10K plus . NH rep tells me he is getting this every time he quotes at the moment.
What are CNH trying to do .?
I recently been pondering on what to do going forwards.
current system is mainly plough, a pass with a power Harrow or press and combi drill. It works 10 years out of 10
But
the plough is getting very weary, expensive to run and in anything other than a perfect season I’m struggling to get...
Got to look at buying something similar to the title. 240 to 260hp I guess. Max budget is £150k as need to put a front end loader on as well.
I don't get to sit on the seat much so no real bias to manufacturer but where would you put your money? Work will be 100% lime and fert spreading pulling...
I’ve got to sell this 2018 Tri till for a neighbour. It’s like new. Just changed the original points on legs. Hydraulic depth control on discs and hydraulic leg reset.
I’ve zero knowledge of these machines so would appreciate an idea of value
First year with Claydon. Currently running carrier shallow ahead of drill to disturb slugs. This what we do with Rapid also, feels like spent a lot on a drill for no big advantage!!
how do people control slugs in this scenario? I don’t want to start blanket applying pellets priori to drilling...
Bready Farms lifting wholecrop with the new Case IH Puma 200 CVX on the Krone 550D Forage Wagon Nice way to break her in with some whole crop now, tho doesn't take long to fill her!
#arimagery #wholecrop #krone #caseih #photography
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.