pump

Dear all, Having an issue with with our sprayer. Left some water in the sprayer overnight and noticed that it's dripping on the floor from the pump. There are three small holes in the pump casing, looks like the water is dripping from the bottom one. Any advice most welcome. Many thanks

Hi folks, Looking for any help, I've to replace the hydraulic pump on my Zetor 5211, straight forward job. However, after removing all the bolts on the plate underneath the tractor, the plate will not come down. Its like there's another 10 bolts holding it up!!! I've checked a few times now...

So i was thinking of buying an old vacuum tanker with a splash plate for using to spread the effluent from our silage pit. But having never used one before im not sure of the ins and outs. Does the tanker force the liquid out onto the splash plate so does the pto and pump need to be attached and...

can anybody recommend a pump under £100 where I've got a 3-m drop from a hillside and I can't put the sump into the brook so I need a hose in the in the brook to pump up there's no urgency of any litre capacity it's just for a very slow irrigation watering you hedge.early thx

Am having some slight problems setting up my parlour wash down pump. Have got it all pipped up, ready to run but having some issues with the electrical wiring going from the pressure switch to the pump/capacitor, got it running. Thought I had it sorted lastnight but it seems that the pump is...

Hi, I'm in need of a slurry pump that can pump at approx 30m head the flow just needs to be approx 200L/min+. Ideally i need it petrol/diesel driven but can deal with pto, hydraulic or electric. Does anyone have any ideas how to do this/know of any suitable pumps it only needs to be done a...

Hi, I'm in need of a slurry pump capable of pumping poultry slurry during wash down period that can pump at approx 30m head the flow just needs to be approx 200L/min+. Ideally i need it petrol/diesel driven but can deal with pto or hydraulic.

Dear all, I have got me self an old-timer Sanderson Telehandler that seams to be as old as I. There are more broken stuff than things that works !!! so I am in the deep end of the pool at the moment :-) I wondered if any of you good members here on TFF can give me some info on where to...

Water pump repair pics with explanations as unprofessional does it on Valmet 805 and MF 390 on my pages now: http://www.haapasalontila.fi/805waterpump.html

We had a 80KW heat exchanger (5ftx10ft) fitted up to our 120kw biomass boiler. Positioned in front of the tunnel fan. I trusted the Hetas plumber to select the right gear for the job. Now Ive tried it and the heat it produces doesnt seem enough. Its not enough to make the boiler work hard and...