quicke loader

  1. Stags Agri

    SOUTH WESTS LEADING ONLINE TIMED MACHINERY AUCTION - NOW LIVE UNTIL 18th APRIL 2021 - 1000+ LOTS!

    “THE SOUTH WEST’S LEADING MACHINERY AUCTIONEERS” NOW LIVE!! – CLOSING ON SUNDAY 18TH APRIL 2021 (7PM) THE SOUTH WEST ONLINE TIMED COLLECTIVE SALE OF 50+ TRACTORS, EXCAVATORS & VEHICLES, FARM MACHINERY & AGRICULTURAL SUNDRIES (1000+ LOTS) To include: The Dispersal of the Pleasant View...
  2. D

    Best Decision For Quicke no.3 Headstock/Brackets for Quicke 540 Loader

    Issue- I have a tractor with a Quicke 540 loader, with Quicke No.3 headstock, arriving soon. I've looked hard but can't seem to find used attachment for Quicke No3 (bucket, forks). There seems to be lots for Quicke Euro 8. The question is what is the best thing to do? 1/ keep Quicke no.3...
  3. B

    Quicke loader

    Could anyone tell me the difference in dimensions between a 560 and a 650 Quicke loader, can’t seem to get anything of there website, cheers
  4. Seth470

    Wanted John Deere 2130,1630,3130

    Wanted John Deere 2130,1630,3130
  5. zsnotdead

    Jd 6000 series and 10 series

    Where have all the 6000 and 10 series John deeres gone,very hard to find one for sale,you can nearly get more of the older 50 series for sale,good 10 series very hard to find
  6. early riser

    Retrofit on-board weigh systems for telehandler

    I’m looking at options for retro-fitting an on-board weighing system onto my telehandler as I don’t run a diet feeder and want to be more precise with feeding. This would be for weighing forages and moist feed, rather than small amounts of conc etc. Does anyone have experience of these systems...
  7. Northeastfarmer

    Valtra v John Deere

    Have had a quote for a John Deere 6130 M and a valtra N134 Both have loaders, the valtra has come in a few thousand more than the JD, I would say the valtra is a higher is spec than the JD but not a lot on it...tyre sizes are the same on both machines. We have never had any other make but JD and...
  8. Jim G

    Case 4230 - slow starter

    Evening all, I'm after a bit of assistance if possible. I've got a Case 4230 that's slow to start. We've put a new battery and heater plug on, but it's still sluggish turning over. In cold weather, it doesn't get going at all. I'm looking at getting a starter, but I'm unsure whether to get a...
  9. S

    Kramer hydraulics

    I have a Kramer 30.8t which I like,but lately I am having to unscrew the flat face coupling on the headstock to release pressure before reconnecting the pipe from a third service.It has a button on the boom which is supposed to release pressure and seems to work when the pipes are on the third...
  10. JLTate

    Case CX100

    I have chance of a Case CX100 (Landsman special?) 7500 hrs ish. It has a Quicke loader. I'm debating about getting it to 'get me through' until something else comes along. Main reason been is that its not a huge amount more than what a new loader is for the MX135. It will purely be used...
  11. Cmoran

    Implement adapter plate?

    Where is best place to buy an adapter plate for my jcb Loadall to euro brackets?
  12. Will2May

    Clutchless replacement for a NH T5

    As per the title, exploring what's available to replace NH T5 electro command. It's a tier4b 2017 with quicke loader. Small cab and awkward seating leg angle with a knackered tendon in left foot has got me thinking about using it as an excuse for a change. Would like to stay blue so maybe a...
  13. N

    Plumbing in a loader McCormick CX

    Anyone tell me how to plumb in a loader. Have a new chest valve but what pipe goes where? There is A1 A2 a1 a2 T1 T2 etc
  14. Stags Agri

    Full Dispersal Sale of Telehandler & 5 Tractors at Bradnich, Exeter, EX5 4LT - Wednesday 23rd September 2020 - 700+LOTS

    Chapelhaies Farm, Bradninch, Exeter, EX5 4LT Wed 23 September 2020 STARTING AT 10.00AM (WITH THE HOUSEHOLD FURNITURE) DISPERSAL SALE OF TELEHANDLER, 5 TRACTORS, VEHICLES, FARM MACHINERY, TRAILERS, ATTACHMENTS & IMPLEMENTS, LIVESTOCK & GENERAL EQUIPMENT, VINTAGE EQUIPMENT & SURPLUS HOUSEHOLD...
  15. Rob5150

    Tractor dilemma

    I currently have a 2013 Puma 160cvx which has just clocked 5000 hours, body work is in excellent condition and a have just resprayed the wheels and rear mudguards. I also have a 2140 fastrac which I am selling, now the plan had been to take the 20-25k from the fastrac and give the Puma new set...
  16. Ali_Maxxum

    Loader brackets/front linkage visibility?

    So, A question for owners/users with front loader and front linkage combination. I've not used either as a combination, only ever either or. As I do a lot of front flail work, quite often in small patches and plenty of obstacles and tight access, my main concern is the loader brackets...
  17. A

    quicke loader

    will a quicke 2560 loader on a international 584 handle large silage bales, i already have the tractor and have seen the loader for sale but not sure if this will suitable for heavy work
  18. Stags Agri

    SOUTH WEST SALE OF 40 TRACTORS, COMBINES & FARM MACHINERY (650+ LOTS) - Ending Sunday 2nd August 2020

    NOW LIVE! – THURSDAY 23RD JULY – SUNDAY 2ND AUGUST (7pm) 2020 SOUTH WEST SALE OF 40 COMBINES, TRACTORS, EXCAVATORS & VEHICLES PLUS OVER 600 LOTS OF TRAILERS, FARM MACHINERY, GENERAL & LIVESTOCK EQUIPMENT BY ONLINE TIMED AUCTION 600+ LOTS To make enquiries with...
  19. C

    New Chinese loaders & telehandlers?

    Hello TFF, Some brand new Chinese telehandlers and wheel loaders floating about. But does anyone have one, and are they any good? HZM, DGM, Herecles. North Norfolk Vehicle Solutions seem to be offering various models between 10 and 20 grand. Need something small and nimble for daily yard work...
  20. Bossfarmer

    New NH t7200 and loader, what should i be paying??

    As the title suggests, it 50k 650 tyres on rear 540s on front what ballpark figure should i be paying in total, loader is a new quickie Q6M, im quoted 92,000 just now is that not a bit high?
Top