repairs

Randall Farms Ltd are recruiting for a Farm & Estates Operations Manager Located in East Berkshire, Randall Farms Ltd is principally a 350ha arable farm with increasing amounts of diversification focusing on sustainability, rural property and alternative land uses. Full time employee required...

Hello Ive got a Weidemann that has developed a fault when hot with number 1 injector. It puts the machine into limp and runs really rough. Is there anyone who repairs them? Main dealer want a small fortune for a new replacement obviously. I will have a dig around when i have the time to make...

Just a heads up for Andrew Cross of A and R Handling nr Banbury, AKA @ACEngineering . I stupidly damaged my New Holland (Manitou based) telehandler with shear incompetence. I could not see from where the damaged pipe work had been ripped. Over the phone Andrew looked up the relevant area and...

Looking for a small portable welder just to do some bits and pieces with, I won't be making trailers from scratch so doesn't need to be fancy. Just welding up the odd feed barrier, break in the parlour etc Any recommendations for something sound the £100 Mark? Is there anything that's any good...

Might interest a few. Can someone post it on here?

Hi, has anyone got any old digistar 2400 display off old feeder wagons they either dont need or are broken or faulty, the same as in the picture.

What do I do? I've now asked someone 6 times for an invoice for work he did for me 6 months ago! I'm not sure exactly how much it is, I think it's just under £500 but it's pissing me right off. I had a phone call the other day from someone asking why I haven't paid as I'm now 7 days over due...

Inspired in some way by the gatecrash of the Fendt gearbox thread, just thought I'd see what folks did. 20 years ago we managed with two 6290's and a 3075, and up to three hire tractors at peak times and contractor help for beet drilling and harvesting, hedge cutting, square baling, destoning...

As above needs sorting out. Needs a new cable and an odd weld but won’t positively push itself into locking position. The two flat steels running through the centre are solid and appear to be as they should. Are they spring steel? Should they have tension on them and how is this achieved? Can’t...

Afternoon, After any thoughts on a recent slurry tanker collapse. 2004 Abbey tanker, old agreed, but mechanically sound; never used for slurry, only yard water / septic tanks / harvest fire bowser etc Tank imploded when emptying a septic tank. Insurance company don’t want to know as they...

I know i post a lot, but please, is there anyone with a story, of a relative or person, either from any ww1-2, or even a recent conflict they would like to share with us all, i would be pleased to know, have you a relative, or person you know of thats name is on your local war memorial, my...

Written by Richard Halleron from Agriland According to Omagh-based accountant, Seamus McCaffrey, accurate record keeping has always been an important aspect of farm management. However, in the current volatile business climate, it is a facet of farm planning that has become of critical...

Had an inspection booked for weeks now she the inspector rings this morning and asks if her boss is ok to come with her and inspect her i told her no its bad enough having 1 of you she seemed a bit put out what am i going to tell him the truth i said said she will have to rebook when i have time...

Am trying to make myself prefer the Izuzu D Max as its lighter and doesnt run the over 2040kg weight/ speed issue but it isn't stacking up to my 2019 L200 - sadly no longer available to the UK market. Anyone got a 2023 Ranger? Hilux? ETA are roller tops ever waterproof vs a full cab? Many thanks

Wanted. 1 x Trelleborg TM900 650/75 R38 tyre with as close to 40mm tread as possible, that’s in good condition with no repairs. Ring 07747 633867 if you have anything Thanks

I'm in the very early stages of considering a new milking set up (still at the stage I come out in a cold sweat when thinking of the cost) I think the best solution would be a rotary for the usual time efficiency reasons and to provide a great environment to work in. I'm currently milking 330...