So….
My elderly father (88) has got a really old Zetor tractor that he potters around with doing a bit of topping and the like but unfortunately I think the head gasket went and over heated and seized.
Now I would consider myself reasonably competent with the spanner’s but I’ve never rebuilt an...
Is it possible to fit a trailed 991 Mchale round bale wrapper On a 14 ft, 6’6” wide
Ifor Williams flatbed trailer?
Any dismantling required or is it a complete Nono?
Thanks
Does anyone have experience with the new Fendt rotana F130 fixed chamber round baler? Currently running a McHale 5500 and looking to upgrade and wondered what the Fendt baler is like as it’s a lot less money than new McHale. Thanks
Hi all,
Having a few issues with a baler I just purchased. Its not done a lot of work so immaculate condition, but I have just tried to bale some barley straw and cant seem to get it right (its also my first time using a round baler). The first few bales were far too light and the string (its...
Why is the evening air humidity so high the last few days and again this evening?
Most unusual especially in September.
Would @Simon Keeling , be kind enough to explain what’s causing this unusual weather for September, it would be much appreciated.
We have sheared a PTO shaft tractor end while on a 2.8 metre topper can't see anything wrong with the topper could it be possible that the tractor PTO soft start is faulty?
does anyone know the mim litres/min the hydraulic pump would have to be on a tractor to lift up a well packed mchale heavy bale?
Would 35l/min be enough?
Please can any of you with hands on experience of picking up flat wheat, as per the attached picture, give any tips on combining it.
I do use a low as I dare pick up reel tines with reel forward, and very fast reel to flick wheat up in front of the fingers .
Do any of you cut the flat wheat at...
Never owned a rake before and can't always get someone to rake for me. Seen some 2nd hand twin rotor rakes between 4 to 6000. What wears/do you look for when buying 2nd hand? Any makes better to consider when purchasing?
Ive got a new tractor and its now run in at 600hrs, i cant get anywhere near a days work out the tank, every day im having to re fuel at lunchtime as its slightly thirsty and the tank is far too small for its hp.
hows everyone finding this? its such a lovely tractor but unworkable if away from...
I use a rear pto compressor for tyre pumping have a air compressor blow gun as you would expect not much ompth from that for cleaning .before I go out and buy a plug in one which I presume would have way more pressure, would a plug in one clean off that oily soil which seems to build up around...
trying to bale straw with a mcale baler, bales five good bales the fails to roll and leaves the baler full of straw which has to pulled out by hand
would a belt baler be better ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.