I dont see any discussion on that matter. Can we mount JD G5 or G5+ screen on Gen4 command arm ?
If not, can extended G5 monitor be used with G4 machines as they have no brain but just show screen.
If yes, anything else needs to be done or just plug and play if same cable ?
What are the options out there for auto/assisted steering for older machinery that isn’t auto steer enabled?
I’m talking Trimble EZ steer type system.
Thanks.
Written by janineadamson from CPM Magazine
The role of collaboration between businesses, experts and farmers, and its impact on the adoption of agri-tech, will be a key topic at the South West AgriTech Showcase later this month.
This is because the agricultural sector is currently being asked...
Written by CPM Magazine from CPM Magazine
Download PDF
Smart technology in agriculture is progressing at a rate of knots with new innovations promising to optimise workflow, streamline processes and utilise every ounce of data available. CPM digs into some of these unfolding technologies.
By...
Written by CPM Magazine from CPM Magazine
Download PDF
Innovation never stands still and with focus moving towards environmentally conscious management, the drill and planter section of the machinery industry is no exception. CPM takes a look at some of the newest products and updates...
Considering putting autosteer on to our JD 7530 which is not autotrack ready with the FETF47 grant.
I’ve looked at the fieldbee system and had a price. How do people rate this system? Is it straight forward enough to use?
Are there any other systems people would recommend which would fit the...
Hi All, looking at one of these to mount on a 6m harrows, are they any good? It says it comes with a self contained GPS unit, how does that work? Thanks
Want to make more use of RTK this year, and was wondering if i should disc everything but the headland with the carrier, drill it with the rapid, then disc and drill the headland last. Figure that would compact the headland the least, and loose it up at bit before drilling. Anyone do this, or is...
A little project to fit auto rate control and variable rate control to a Stocks FanJet Plus, this has an electric driven metering wheel,
that at present is controlled at a set speed from a VS-2 control box:
So I'm using an RC11 PCB the same as for my Knight Sprayer,
This has a motor...
Has anyone yet seen there 3g rtk signal dissappear yet?
Had an email from Chandler's warning us about the 3g signal going and advising we upgrade the 3g modem to a 4g one to save any potential problems when the switch over comes.
From reading the email alot of earlier tractors in in 2013 to...
How do you ever judge whether the end of the 36mtr or wider sprayer boom is not overlapping the grass margins around the edges of fields, especially when spraying glyphosate!!!
I am only asking out of interest as years ago I found it hard enough judging where the end of the sprayer boom was...
Asking if anyone knows the cheapest way ( if possible) to put an after market kit together with this box to make the sprayer (JD512) auto section. Assuming could go matrix and boom pilot I think but also wondering if there's a better / cheaper way.
Hi guys, so I’m looking at getting my own fert spinner and also gps for the first time. I’m just wondering does any auto steer GPS work with any fert spinner? Or do I need to get a certain spinner to suit a certain type of gps? Thanks
After following the various threads I have created the setup described below:
https://thefarmingforum.co.uk/index.php?threads/kv-tellus-geospread.399578/post-9015482
It is successfully receiving and working on a tablet wired via usb, but I can’t make it work via the Rs232 port to the Tellus...
Guidance system, easy to set up running on egnos but can be upgraded to full RTK and Autosteer with the purchase of steering motor and unlock.
07810 860503
Job Opportunity – Skilled Arable Operator
We are looking for an experienced arable operator to work on a 770 hectare farm based in South Essex. Tillingham Hall Contracts is a family run business, farming combinable crops, producing haylage for the equine market, countryside stewardship...
Hi have recently bought a 724 S4 it has a Novotel smart 6 receiver in the roof and the VD03 controller, currently have EGNOS and an option for terrastar L. What other hardware will I need to upgrade it to RTK or is it just an unlock required in the screen?
I’ve got a couple of GPS receivers, came of a 2020 MF 8740S and 2018 MF8738.
tractors were bought at auction and so came with gps units attached now we have no use for them so I’m trying to figure out what they’re worth but don’t really know what I’m looking at or what level of signals they are...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.