Hi all,
I'm having abit of an issue with my Stiga ride on mower (2098H).
It has been kept outside and not used in 5 months due to the weather here in the UK.
I have kept the battery on trickle charge and it has full tank of fuel
I tried starting it couple of days ago but have not had any...
Hello, I've a mf 6265 with a reoccurring problem where the plastic thermostat housing leaks where it bolts onto the engine. This part fails every 1000 hours or so, gone through about 4 or 5 professional repairs and it's just happened again lately. I've heard you can get an upgraded...
I know this has been coverd so many times but I can't really find an up to date opinion,
Currently running dunlop purafoot field things, both me and the wife had them 18 months mine have split down the front and wife's have split on the bottom. We have tried so many different flavours but...
Do people wash their spinners out after every use i.e if you're using it for a week solid would you wash it at the end of every day or just at the end of the week? I've always done it every day but someone said recently to me they don't see the need to. I do sometimes have the issue of the...
Anyone know where I can get some internal hex 17mm need to make some replacement sprockets to replace the silly plastic Fiona sprockets
Plan b is to buy lots of 17mm hex sockets and cut up
…., and having read posts for and against, it’s not worth driving hours to look at a tractor, combine, forager or other large engine driven kit unless you really know what you’re looking at - and even that is likely subjective.
Why? Because:
What does it prove? Photos and video should determine...
I am looking for a welder for farm jobs what sort of amp mig welder would I need and what brand is good but reliable but not too expensive because i am new to welding and would a mig welder be the right thing to learn on fixing things around the farm?
I’ve got a 6m Dalbo Ballast Roller on the way. Found on another thread to fill it with a mix of water and antifreeze. What sort of ratio would one use?
Hello all
Having some overheating problems with my db 990. After about 15mins of work it overheats and it vents hot coolant out of the top of the radiator. But if I then touch the radiator it is all cold.
I have had the thermostat out and there was some nasty black fatty stuff on it, so I took...
Looking for a second hand truck. Hope to keep it for a while as won’t be doing many miles a year, so I want something reliable When out of warranty. am i right in thinking that a newish ford and VW have the same Ford engine which has reports of been unreliable. How old would I have to go to get...
Hello
I'm about to commence a county court claim against this outfit, who sold me a tractor which was significantly mis-described. Does anyone else have any similar experiences with them?
Long story short, I enquired about a 2013 MF5410 early November 2023. I decided against progressing...
Written by CPM Magazine from CPM Magazine
Download PDF
Adaptability in a T1 programme can help to set growers up for unpredictability in weather and disease pressures. CPM explores fungicide options and approaches as we move into the spring.
By Melanie Jenkins
Boots on the ground indicate...
Written by CPM Magazine from CPM Magazine
Download PDF
Adaptability in a T1 programme can help to set growers up for unpredictability in weather and disease pressures. CPM explores fungicide options and approaches as we move into the spring.
By Melanie Jenkins
Boots on the ground indicate...
Written by CPM Magazine from CPM Magazine
Download PDF
With no letup in weather conditions, questions continue to be raised regarding balancing fungicide spend with crop yield potential. CPM spoke to four independent agronomists for their take on the situation.
By Janine Adamson
If there...
Written by CPM Magazine from CPM Magazine
Download PDF
As Revystar XE enters its fifth season of use, CPM takes a deep dive into the active ingredients in it to understand the journey so far and the science behind the product’s consistent performance.
By Janine Adamson
Launching a new plant...
Getting time to change, looking for small crossover ,suv , something I can step into not fall into and have to heave myself out. Don't want a ladder to get in either.
Reliable , comfortable, reasonable economy, and a spritely drive , want decent performance doesn't have to be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.