Written by CPM Magazine from CPM Magazine
Download PDF
With grassweed pressures rumbling on, one way to achieve sufficient control is by taking advantage of sugar beet in the rotation, even if there’s a limited armoury of effective herbicides. CPM finds out more.
By Janine Adamson and Rob...
And it's nothing to do with deer.
Started the 2nd N application on Wheat yesterday and I had to drive a quarter of the wheel over on the headland tramlines to prevent puddles created from previous passes spraying everywhere and to level the soil a little.It wasn't too bad, I thought,as I drove...
Written by CPM Magazine from CPM Magazine
Download PDF
It’s taken three decades from inception to UK industry adoption, but Closed Transfer Systems are here to stay. CPM explores how this technology came to fruition and the benefits it brings to operators, the environment and the industry...
Written by CPM Magazine from CPM Magazine
Download PDF
With an exceptionally slow and difficult start to the season for farmers across the country, CPM seeks advice from the experts on how to address some of the biggest spraying challenges on the horizon and how to make every spray as...
Can anyone identify where these sealing strips go? I removed the bonnet and side panels of my MF 390 for spraying and have these left over when reassembled and can't remember where they came from! Two of the short ones seem to come from behind the front grill (to protect the plastic fuel...
Looks like a window opening up end of week, weekend to get sprayer out.
OSR beginning to flower, have Fungicide,PGR, boron to go on. Have had spray recs for about a month and never got it on. It's had 110kg/N already but normally like to get last application on as flowering starts.
Winter...
Hi folks. After a bit of help. I have a Leeb AX, whilst spraying this morning in auto, the pressure dropped to 0.8-0.9 bar. In manual I can increase the pressure, however it still shows a low pressure warning at 3+bar. Jug testing has show the blues are putting out 0.85L at 3bar instead of the...
I thought I did on the Sainted Isle but that seems to no longer be the case …
Recently, we tendered and won a block of 70ac on the outskirts of a village and accessed by a lane with houses off. I said to son after we’d walked the land that if we won, there would be trouble…… and yesterday we...
Hi all,
We have a home made osr drill, it is a 10 leg subsoiler using heva stealth legs then followed by a crumble bar then Metcalf points. The seeder is a techneat multicast.
I'm thinking of adding a tank to apply liquid starter fert. Has anyone made an applicator before?
We have some old...
Is there any weed killer available or a mixture of sprays that works on holly bushes that are about 18 inches high. I was told to put round-up on the stump but that's not practical.
I have an old crawler I want to re spray. Lots of daft bits to do on it. May put the bonnet and other panels out to a professional but want to do the rest my self. Wheres best to get a decent spray gun and what should I be looking for?
Trying to cheer myself up with thoughts of cows grazing a forage crop in the sunshine.
Which varieties are recommended? What is expected DM yield per hectare?
Want to graze from first few weeks of July so was thinking to put in late April/early May. Thinking full cultivation to put in as I...
Just thinking aloud here..
Getting on for spring barley,maybe better off with something else.
Thinking a couple of ton of grain maize off the 10a might be better.
Would be all fed in house to beef.
Can sow it with the combi,
Have small conventional combine header to cut it(if it will do it)...
Production of some crops has been decimated due to the loss of insecticides over the last 20 years, sorry 45 years.
Has the bee population increased, if not why not?
Anyone using this compost on grassland ? I make haylage every year and have no livestock, I'm very reluctant to import Slurry or Dung as in the past I've found that it's a great way to import weeds /docks etc. It seems that at times this compost can be obtained FOC, so just thinking it might be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.