tedder

Hi I’m thinking of putting two mowers on an Arian 610 (150hp) would I need a conditioner as I think I might be under powered . I usually ted grsss straight after I is cut . All grass for silage only Advice would be appreciated 👍

I am currently looking at one of these for doing the bit of hay I do.What things should I look at\check when at it.thanks

Hi does anyone know how to take apart a class volto Tedder arm. Taken the arm off the Tedder to replace a bearing but can’t see how to get either end off ?

Written by Justin Roberts from Agriland Valtra has responded to the relentless increase in tractor power and specific demands of different agricultural sectors by introducing a further series of machines, which they have designated the ‘Q’ series. The new tractors fill a long present gap in...

My MF 390 just stopped. Quite abruptly. Bled the system and off we go again. Then, stop! Again. I cleaned the lift pump which was full of gunk, then onwards with more problems which I will not bore you with. Couldn't resurrect the lift pump, so replaced it along with a new fuel filter. I have...

Written by Richard Halleron from Agriland Pottinger has added the new TOP 882 C rake to its range of centre-swath rakes. The machine delivers a working width of 7.7-8.8m, with the boom allowing swath width adjustments between 1.3m and 2.6m. The rake’s specification includes a rotor diameter of...

Written by Richard Halleron from Agriland Pottinger’s new 10-rotor linkage mounted tedder has a 10.70m working width. Each of the rotors on the HIT V 11100 has a 1.42m diameter. The launch of the new specification, completes Pottinger’s mounted tedder range. According to the manufacturer...