Anybody replaced their rage evo blade with something less terrible/expensive?
is the worst thing on the farm, noisy, really nasty sparks, not a nice cut, slow, expensive blades and easy to knackered the tips. anybody just put 12” grinder discs in them?
Keeble bros wearing metal
Advert added by: Anthony Wiseman @ace
Machinery Details
Category: Wearing Metal & Parts Wearing Metal Price: £3250 Condition: Good
Description
Wearing metal for a Keeble Progressive. 9 legs and clamps, 5 spare legs, 7 weld on...
Just had been pointed in the direction of a facebook post boasting diamond dusting on wearing metal showing what looks to me like a cousins subsoiler leg or similar which has done 1300acres on sand? Wear looks ridiculously even and had alot more life in them? Couple of chaps had posted on this...
What can we expect in 2021?
After the challenge of harvest 2020, we go into 2021 hoping for an improved year not only in agriculture but that Covid-19 will slowly dissipate with the distribution of a vaccine. From a purely agricultural point of view, there is already more optimism that the...
Been quoted for containers with CISA 285/75 lock or SQUIRE solid steel, anti pick, anti bump lock. Which is best? Is there a better one? Is the covering as/ more important than the lock itself?
Just a heads up everyone............steel prices are rising quickly currently, with an £80 per tonne uplift planned for January. If you are thinking of doing anything in steel in 2021 then it maybe worth considering asap as you could save some money !
This is not a pitch for business, just...
Got plenty wood to cut up whats folks using thats sensible money to cut n split in one machine? i dont want it with a Fendt Tractor price tag mind.
anywhere specialize in decent used one i should be getting intouch with Thanks (y)
Just a frustrated rant... Put up a new cattle shed last year. Put led strip lights in as well as 2 little led bulk head lights for night lights. The lights haven't even been running a full year yet and were of during the summer as the cattle were out. Now the cattle are back in the 2 led bulk...
How about this as a cheap way of getting into direct drilling? I have this...
and this...
(bit rougher now as that photo's 20 years old).
Whack the DL hopper on top of the pigtail cultivator, change the pigtail shears for (?)Baurgault points or whatever the experts recommend, sort out a...
Main rev counter on my Zetor 7045 is a bit temperamental & sometimes on a cold morning doesn't register for a half hour or so. This is not usually a problem , but I've recently resurrected a Japa 100 buzz saw which needs to run at a specified PTO speed (400 rpm). Mindful of flying tungsten...
So to follow up the last thread... She still doesn't cut right. Blade has been off to EPS and they hammered it and sharpened it. Still getting hot in the middle of the blade. Is there anybody who would be able to come out and look at the saw and find out what's broken? It's still getting hot in...
Not a DDer currently but considering it, and from what I gather many would recommend a T-SEM as a good option for a small farm with a limited budget, which we are. Any general advice welcome, but specifically what are people's thoughts re row spacing? We bale all our straw but aim to spread...
Probably should post this under the DD categories but felt it may not be viewed by non DD folk.
Been soil sampling on a couple of large direct drilled farms recently and consequently dug a lot of holes. One of the farms was about 1200 acres, been direct drilling for about 15 years. Stubbles...
Looking for a auto reset/sprung loaded tined cultivator to work stubble and disced land. Ideally with a packer roller and as wide as possible (200hp available). Trailed or mounted. Needed ASAP.
PM please ASAP!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.