tyre pressure

Does anyone use them these days ,i used to use an old set of trailed that evenually wore out ( always managed to get a seed bed) and were replaced by some of these mounted "short type" which seem to be the fashion but they dont seem to do a good all round job no depth or penentration ,how does a...

Evening I have seen the reviews in the recent Profi magazine of the pressure gauges. They test everything except for the low pressure end (5-10psi). What are people using that work well. Either analog or digital, ideally with a decent size display.

Any sabre tine users on here ? Do’s , Don’ts , Tips or advice. We haven’t used our yet just waiting for it to dry up a bit .

Into my fourth season with the flail now, and there are some questions I'd like to put forward. Trundling along the top, I get a steady rocking motion of tractor and cutter, a bit like baling, but sideways. I've tried lower revs, stopping and restarting, can't go any slower, can't keep up if I...

Until such a time as i can get to a weigh bridge, does anyone have a guide to the weight spread between front and rear axles so we can calculate tyre pressures a bit more accurately? Thanks

I am often seeing adverts from, presumably, ambulance chasing lawyers about claiming for misrepresentation if you have a VW product of a certain age. We have a 'qualifying' Skoda. Just wondering if anyone's tried claiming this? Are these advertising lawyers worth bothering with, or is there a...

Morning all, so I have my teleporter test next week, I've used teleporters for years but finally getting my test, anyway I'm not feeling very comfortable with it being so soon as I've had no proper training. I was just wondering if you guys had any tips for what to do in the test, and what they...

Pulled a single leg Browns mole plough out of the nettles this afternoon, last used 35+ years ago I should think. I have about an acre of blue clay at the bottom of a field to mole into a ditch, so don’t want to spend on anything like a new expander. Buying a 3/4” pin for the leg was bad enough...

https://www.bbc.co.uk/news/uk-england-devon-54017386 Please check the wheels nuts as a routine. None of us want this to haunt us for ever us a day. And while you got nuts on our minds check yours or the other halves out at the same time! https://www.nhs.uk/conditions/testicular-cancer/

Morning all, it’s getting very wet down here in Aus, with nearly 8” for August the paddocks are boggy as hell. At the moment running our linkage Bogballe on the T7 is out of the question and will be for a while. We are thinking about putting duals on the front and back to increase floatation...

Has anyone any experience replacing sheared wheel studs from a Richard Edwards tanker (1300 gallon) Is it a big job? Or is it fault straight forward ?

Is a 900/60r42 a suitable replacement for the above? Tia

Any one from trelleborg tyres read the tff. . Please contact me by pm 😡

Which is the better bet for hauling heifers on mainly motorways/dual carriageway- twin or tri axle? 500 mile round trip but only loaded one way

Fendt 936 Vario Gen6 Tractor Advert added by: Lister Wilder Machinery Details Category: Tractors Farm Tractors Price: £0 Condition: New Description How to make contact with the Dealer Click here to read more about this listing and contact the dealer

Good evening, we have an 8M Dalbo Cultimax, but nowhere on the book it mentions anything about tyre pressures. Does anyone have one of these and if so, what tyre pressure do they run theirs at? Many thanks in advance.

Any tips, got a 12m header and not looking forward not only are the beans short but they have prodded low down?

I've just taken delivery of a new N-Guard. On the whole, I like it but the suspension seems very firm, you tend to feel every imperfection on the road, are they all like this, and will it "bed in" come time?

OK, it would appear that someone of influence in the new Grenadier vehicle has been made aware of us and is paying attention is that not so @CPF . If so this is a first class opportunity for us to get our ideas straight to the right people. So put your ideas on here of practical / beneficial...

Hi new to here and not really a farmer (car and van mechanic with a mot station and a small holding) I bought a jd6230 standard 2009 with a loader a few months ago for doing our hayledge,no experience with tractors and only used to driving my international 685xl. when clearing the fields and...