Under request from @Bokey I have decided to dedicate a thread to the trials and tribulations on the farm, I shall endeavour to splice the good with the bad. A bit about us, 600 acres all told, 450 cropable, 8 years into organic, mainly arable with a few wooly critters, an impatient old man and...
At the VDMA press event this week, we launched the all-new Seed Hawk 600-900C, designed specifically for the European and International markets. The machine will be on display during the Agritechnica exhibition in November.
Seed Hawk 600-900C has a large hopper with three compartments, offering...
After this springs exercise with spring barley that was spun on (undressed hss seed ) . We were getting late last week of March so spun on the seed and a very light cultivate in with a wilrich cultivator and rolled in and it had a pre em . If we had waited any longer it would of been mid April...
Starting to get a little worried now. Spring seed might be short... Weather doesnt look great on the forcast - given how sh!t harvest was, could we be in for just as bad an autumn?
Hello to everyone
I am about to buy a new tractor , and wanted yo know if there is any difference between 6195M and 6175 m besides the horsepower
Thank in advance guys
I get the impression from the article in this weeks Farmers Weekly about farmers views on their Direct Drills, that the ultimate Direct Drill has not been built.
Is that a fair judgment or not?
Perhaps some of the farmers featured are TFF members, so would be interesting to hear what they say.
I’ve bought an old set of Vaderstad Carrier discs, but just wondering how you undo transport latches to open them in the field as at the moment we’re having to put a bit of wood under the hook so when you back up they come open.
Is there something missing from the end of this or how does it...
We are having issues with our T7.315. New last year and FMX installed by dealer and GPS supplier (well known national firm) at local tractor dealership. It is on RTK with a local Trimble base station. We run three FMX units in CNH tractors and the other two are working fine. Last autumn and...
Hi just wondering what is the minimum power requirement for a 4m stubble cultivator at 7 to 8 inches deep, the likes of a vaderstad cultus or kuhn cultimer or horsch terrano please.
We’re on soils that go hard and struggling to find a machine to chit them unless they are wet. We persevered with a vaderstad carrier for a few years but got rid of it in the end as it just wouldn’t penetrate hard soils. We then used a mounted disc/press machine with the idea the tractor linkage...
I’ve bought a s/h set of 12m rolls that have a stocks fanjet mounted on them. Will I actually be able to get the feed slow and consistent enough to work at 8-10kph 12m wide rather than 25/30kph at 18/24m on a quad bike. The rolls were the right money regardless of the slug pelleter but would be...
New to me Vad 400S with radar metering. What number do i set the manual screw scale at bottom of hooper on for drilling rape ? The book chart is a bit confusing.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.