vicon

  1. masseybreaker

    one for the slurry boys

    mtx will go weak at the knees
  2. J

    Urea vs protectdd urea

    What's the difference other than £60/t? Does the protected stuff milk the cows for me or transport the grass to the silage pit? Or is it another magic potion created by someone clever? What time of the year do you need to switch to ammonium nitrate? End of may/early June?
  3. D

    Bale trailer

    Am looking into getting a bale trailer, what is the ideal length for both 4 bales along the bottom and 5 bales along the bottom, am I right to be wanting a tandem axle or are single axle still very stable on the road. Is there much difference turning Thanks
  4. Boydvalley

    KRM M2w as a used buy

    I’m Replacing an ancient Amazon spreader and have decided I’m getting a Krm. Not spreading much and would go for basic L series, but looking around there are a lot of 10year old M2w. Got me thinking that having weigh cells would be great to know he actual weight applied as doing small fields...
  5. Stags Agri

    SALE OF TRACTORS, VEHICLES, PICK UPS, CARS, TRAILERS, FARM MACHINERY, LIVESTOCK & GENERAL EQUIPMENT, WITHIEL FLOREY, EXMOOR CLOSING- 8/1/23

    NOW LIVE! DISPERSAL SALE OF TRACTORS, VEHICLES, PICK UPS, CARS, TRAILERS, FARM MACHINERY, ATTACHMENTS, LIVESTOCK & GENERAL EQUIPMENT (450+ LOTS) TO BE SOLD BY ONLINE TIMED AUCTION AT WITHIEL FARM, WITHIEL FLOREY, WHEDDON CROSS, MINEHEAD, SOMERSET, TA24 7DE On behalf of Mr R M Dod (having...
  6. edwhite

    Hard centre baler

    We are looking to bring our baling in-house and are looking for a good second hand round baler that will give us a good hard centre as we use a bale unrolled for feeding. Can anyone point me in the direction of a baler that would fit the bill?
  7. D

    Sulky x40 econov

    Anyone got one? Good spinner? Pro's and cons please?
  8. PuG

    Vicon vari spreader spreading chicken compost powder?

    Quick question, can an old Vicon vari spreader spread composted powder assuming its dry? I guess you would need the agitator in the bottom fitted. Reason is our fields are to steep for a more ordinary flat bed spinner. Cheers
  9. T

    Sale near Aberdeen

    Anyone go? Anyone know what the vicon mower made? I completely forgot about it
  10. patrick2850

    Kverneland 9584 C rake

    Does anyone know if crown wheel and pinions are available for these rakes? Had a look on the online parts catalogs and can’t seem to find them listed. May be an idea to look at the vicon parts of anyone knows what the equivalent model is? The rake is a 2011 model. any help would be appreciated
  11. Jsmith2211

    Tedders

    Hi all. Looking to replace my 4 rotor tedder for a 6 rotor, something like a lely lotus 770 (now made my MF new). Have had quotes from a couple of dealers, what does everyone have, do you like it and is there much difference between brands? Theres a second hand lotus in the local case dealer for...
  12. O

    Lime through West muck spreader

    I know this has been asked before but havent seen anyone mention a west side spreader, obviously wont be the prettiest of spread but is it worth it just for a few acres? i can get lime delivered fine but its not worth getting a contractor out to spread it. cheers
  13. M

    AB12 supplementary feeding

    Hi, Anyone like to share what and where they are getting their AB12 from to hand feed / hopper feed on their AB9. ?. Bulk, bags, premix or whole?. I only need 500kg.
  14. Andyrob

    Sad to see the season over for 2022 in terms of mowing but check out this

    Campbell Contracts - 820 Fendt on the Class Triples Carsehall Farms - Claas Axion 810 on the Claas Rears & Vicon Front Drenagh Farm - Case Puma 240 on the Claas Doubles & New Holland T7.245 on the Claas Triples Braemar Farms - New Holland T6.180 on the Kverneland Doubles Lyons Contracts -...
  15. D

    Front tank plumbing into rear via banjo fitting

    Hi, I’ve a front tank(hardi 1000ts) that I want to plumb into the rear vicon ixter, what’s the best (cheapest,as it’s not front tank ready) way? I’ve seen holes cut and bulkhead adaptors used in the rear and simply blow it back using the pacer pump on the front tank( which I already have) is...
  16. J

    Accord drill seed rate issue

    I was drilling some oats yesterday with my 'new to me' accord drill & when calibrated with 85 turns of the wheel, I couldn't get more than 4.645kg in the bucket, 46kg/ha when opened up max to 110 on the barrel setting. What could potentially cause this? Seed rates seemed right when I was...
  17. V

    Round Baler cog wheel

    Is it possible to replace a 38 teeth cog wheel on a Deutz Baler mp135 (that drives the feeding auger) with one that has 35 teeth off of an MP130? Can't find a 38teeth one and I'm getting desperate now to cut the crop. Any help greatly appreciated.Thanks
  18. D

    Fert spinner

    Hi all.. after thoughts/experiences and recommendations for a 4 bag fert spinner please?
  19. Wigeon

    High profile farmers

    What's in it for them? Idly flicking through the pages of chemical prodictIon monthly or whatever today's offering is, it seems to me there is a relatively small number of farmers who seem to get noticed and whose faces become quite familiar. Was it ever thus? They might, for instance stand...
  20. Stags Agri

    SOUTH WEST SEPTEMBER TIMED AUCTION OF 60+ TRACTORS, EXCAVATORS, TELEHANDLERS, VEHICLES, FARM MACHINERY (1250+ LOTS) - CLOSING SUNDAY 2ND OCTOBER- 7PM

    OUR BIGGEST SALE ENTRY TO DATE IS... NOW LIVE! THE SOUTH WEST JULY ONLINE TIMED COLLECTIVE SALE OF 1250+ LOTS INCLUDING 60+TRACTORS, EXCAVATORS & VEHICLES, FARM MACHINERY, LIVESTOCK & GENERAL EQUIPMENT. RUNNING UNTIL SUNDAY 2ND OCTOBER 2022 (FROM 7PM) CLICK HERE TO VIEW THE CATALOGUE &...
Top