weaving

TC001061 2006 Weaving RS6000 Drill Advert added by: Chandlers (Farm Equipment) Ltd Machinery Details Category: Tillage Drills Price: £8950 Condition: Used Description Weaving Machinery 6.60m RS6000 Drill,Mounted,Folding,4 rows. Suffolk coulters,Track...

I’ve been looking into options for guidance on a non AGR T7.210, having been quoted £16k plus fitting for full intellisteer retrofit that’s not happening!! The dealer then suggested a Trimble EZ pilot pro, using existing intelliview screen but with Trimble 900 receiver and steering column...

https://www.rgandrbwilliams.co.uk/files/auction_details/Day%20House%20Catalogue.pdf Some very tidy kit - must be farming in a very big way - multiple drills and 3 SP sprayers!

Currently considering a 6m sprinter on dutch/metcalf etc, but also giving consideration to Sabre tine (new type 4 row prob front tank). Anybody run both? Would be used either as direct drill or on very lightly cultivated ground? Sprinter would need full width packer for depth.

What do people think the price difference would be between the two if the specs were matched up? And which is better?

Weaving gd 4m Advert added by: jack martin @jack6480 Machinery Details Category: Tillage Drills Price: £35000 Condition: Good Description 2015 Hydraulic folding Techneat seeder Markers Wheel scrapers How to make contact with the Seller Click here to read more about this...

Weaving Sabre Tine 4.8m Advert added by: Peter Noble Machinery Details Category: Tillage Drills Price: £17950 Condition: Good Description 2013 4.8 meter weaving sabre tine. Bought from weaving in 2018 after being reworked by them. Has bout markers and pre...

Weaving Sabre Tine 4.8m Advert added by: Peter Noble Machinery Details Category: Tillage Drills Price: £17950 Condition: Good Description 2013 4.8 meter weaving sabre tine. Bought from weaving in 2018 after being reworked by them. Has bout markers and...

After new springs and feet for my tractor powered pan mixer... Any ideas? Not sure of make, 10+ years old, Heido I think? TIA

Evening all, looking to buy sabre tine legs for a project. What are people’s thoughts on them? Do they wear well, reliable into uncultivated ground etc? cheers 🤙🤙

Has anyone used 12mm or 100mm direct coulters on a weaving tine drill. I see on their webpage they do a conversion do a weaving. TIA

Has anyone fitted the 12mm or 100mm direct drill coulters to a weaving tine drill. I see on there web page they do a conversion for a Weaving. TIA

4m Weaving/Kuhn Tine Combination drill Advert added by: Phil @TurfWoody Machinery Details Category: Tillage Drills Price: £13500 Condition: Very Good Description 4m Kuhn HR404 Power Harrow with Weaving Tine Drill. Power Harrow 2010, Q-Fit tines, Maxipacker...

Better than mine I hope: Thats winter wheat by the way... Or was. Anyway, despite going on in good conditions, 0.51 liberator and 3lts defy has turned out to be mediumly rubbish. How's everyone else's?

Been running this for 5 seasons without any issues to be honest. However since September when the license was updated for the next 12 months it’s not so good. 8kmh and less it seems fine but anything over and it wanders either side of its line. At a glance it looks ok but looking harder it’s not...

The JD 750a has served us well since our transition to no til. Now in it’s 10th year we’re looking for a change. The 2 front runners are the Avatar and the Horizon dsx; both look very capable drills. Horsch appear to have the greater market share but is it any better? Has anyone had experience...

I managed to get 3 DD drills on demo in the last couple of days. the field is going spring wheat in late March so the emerging crop will not be taken to harvest. But here are a few pictures. No doubt there will be some criticism that I drilled the wrong crop on the wrong day with the wrong...

I have been looking at direct drills for a while now. Specifically looking at the moore unidril, the claydon, the horsch (though ruled that out as they are too expensive and too long in a trailed option) and the weaving (disc or tine). Recently also come across the simtech. We have a mix of...

Just saw this on the news, with farmers being supported by Chris Packam. If I had been drinking last night I would have assumed I was still drunk. Didn’t know anything about this march/protest. Is anyone going?

Hi Folks, earlier this yr i mentioned we plan to start some DD expts at Rothamsted (i was asking about suitable wheat varieties). We plan to buy a plot drill and i'm interested to learn about types of direct drill. I know of disc and tine drills - do they all fall into one of these two...