zetor

Is it just me but is having your dinner or supper in the field in beautiful weather not still a great thing, always reminds me of being young in the 80s with mum n dad and the guy that helped us, this summer has been a great year for that, a pic of Facebook says it all

Seemed very quiet yesterday although it's the first time I've ever been on the opening day.Was very warm but bearable. Anybody else there yesterday?

Got this 2 piece king pin for bottom of swivel come and its tight fit to say the least , any one know if the end cone is meant to swivel on the end of king pin or can all the swivel be done direct onto bearing , this is the old one and the cone runs free on pin !

Best tractor air conditioning, past or present? I’ll start, MF 3000/3600, open the can cooler in the ceiling and freeze the sweat on your forehead.

My 390 just stopped while turning hay. I bled the fuel system and started off again. Then it stopped again. The fuel lift pump was totally choked with crud. It was amazing that it was working at all. I replaced it with a new one, also replaced the fuel filter. But I haven't been able to get any...

As above, tempted. Grass beginning to lay down. It's dry underneath just now.

Supposed to get the train to the Highland Show on Friday morning from Durham. Train was running and unaffected from the Strike-return on Sunday was- then a truck crashed on the line past Newcastle so all trains cancelled on Friday morning. Contacted friends who were traveling with us they...

As above all my forbears were farmers and so am i but my kids have chosen a different path . Absolutely nothing wrong with that but just thinking how easily the farming knowledge that gets past down over the years gets lost in the space of one generation , makes you think doesn't it ?

We have a Zetor 6945 my girlfriend uses for feeding some cattle and doing some topping. It’s always been a good starter until recently. To start it now you have to short the terminals on the starter, been told it’s probably the starter solenoid but wondered if anyone could confirm or knew what...

What would be the best and most reliable 2nd hand loader tractor,110hp-140hp, for under £40 k ? Claas,Massey,Case,and Valtra dealers all within 7 miles away.New Holland about 20 miles.

Evening all back for more advice. What size compressor would you use for inflating tractor tyres. I’ve seen the PTO ones but would a 4x4 in car compressor work. It maxes out at 80psi not sure about the CFM though. or would it be a 50lt, 100lt, 200lt compressor? thanks

Took the old zetor on the road a while back and noticed it over reving a bit up hills, so obviously first thought clutch is shot , only usually use it around yard so not noticed it before , but is there any other fault it could be other than clutch , master cylinder /slave cylinder...

Written by Justin Roberts from Agriland Strange as it may now seem, four-wheel drive in the Ireland and the UK was often considered an unnecessary gimmick – right up until the early eighties. Even when its virtues were reluctantly being recognised it was only considered worthwhile on tractors...

anyone else heard there changing from jd to newholland

I know disc mowers are more popular than drum mowers but I really dislike my Krone disc mower. It's on its fifth season, it's unreliable and is hard to get as tidy a job as with the vicon drum mower we used to have. Looking at alternatives, has anyone got a Weaving drum mower which I think are...

Over the years we have had birds nest in tractors, example one year a robin choose to nest in the roof lining of our ford cabbed scraper tractor, gaining access through the missing back glass ? wagtails are always about here and have nested under the back of little used tractors in the past...

Proving problematic.....Looking for 32x90 front propshaft uj for forterra 10641 2005 vintage. It is smaller than the joint on 7540 tractor.

Someone Know how to tuning a Zetor forterra 9641 ?

Saw this 3165 massy at a sale today had 900 hrs doubt genuine started on the button (hardly turned engine)no smoke prob had a engine refurb everything worked well Inc back actor had the rear arms pto etc it made £2500 to neighbour thought was cheap digger , since this covid tax on everything...

I’m going to look at 2008 jcb js130 with Isuzu engine the screen has stopped working is this a big job to fix? Is there anything to watch out for or should I just stay clear?tia