1. Farmers, growers, processors and industry representatives are being asked for their views from 31 August for 10 weeks on the role of the Agriculture and Horticulture Development Board (AHDB).

    The AHDB is a UK statutory levy board, funded by farmers, growers and others in the supply chain. As we leave the EU, there is an opportunity to ensure that the sectors that the AHDB covers are as competitive as possible. This review will look at the AHDB’s purpose and priorities, its strengths and where improvements need to be made.

    This is a joint 10-week exercise covering England, Scotland, Wales and Northern Ireland. The request for views will close on 9 November.

    click here to have your say...

    or

    go straight to Defra to fill out the survey here....
    Dismiss Notice

10 Series Ford - Engine Speed Sensor/ Tachometer

Discussion in 'Classic Machinery' started by NewFarm, Oct 7, 2018.

  1. NewFarm

    NewFarm New Member

    I am looking for the part number for the speed sensor / tachometer that is fitted to the end of the fuel injection pump.

    This is the electronic type /digital dash.

    Any Ford spotters have this info to hand?
     
  2. agrimax

    agrimax Member

    Location:
    Co Down
    [​IMG]
    This?
    Part no.84554206.
     
    cormywormy likes this.
  3. livestock 1

    livestock 1 Member

    Does that not fit on the side of the block?
     
  4. agrimax

    agrimax Member

    Location:
    Co Down
    I'd have thought so. Same place as the mechanical system uses.
    No mention of anything on the injector pump in the parts books.
     
  5. db9go

    db9go Member

    Location:
    Buckinghamshire
    That goes on to the back of the injector pump and a small plastic sleve also
    what tractor are you looking at
     
  6. agrimax

    agrimax Member

    Location:
    Co Down
    T'was a 7610 parts list I looked at. SQ cab..I assume this is what he's after then? Shows it for tractors fitted with field monitor but doesn't actually show where.I wrongly assumed it would have fitted to the block where the tacho cable goes on earlier tractors.........
     
  7. db9go

    db9go Member

    Location:
    Buckinghamshire
    Its the same on all of the tractors that has electronic dash and inline pump
    what is the fault you are getting with it
     
  8. agrimax

    agrimax Member

    Location:
    Co Down
    Must be on a 78,79 or 8210 then. The OP hasn't said yet.
     
  9. db9go

    db9go Member

    Location:
    Buckinghamshire
    And TW
     
  10. NewFarm

    NewFarm New Member

    Many thanks for the input, it is for our 7810 Series II with a digital dash. That part looks like the correct one.
     
    agrimax likes this.

Share This Page